Epson TM-J2000 Spezifikationen PDF herunterladen (Seite 375)

100

101

CONFIDENTIAL

Paper roll Mechanism control commands GS V

Ver. 10.05 p. 375

[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60, TM-U230,

TM-U220

TM-J2000/J2100

The vertical motion unit is specified by GS P.

The cutting shapes of (m = 0,48) and (m = 1,49) are the same as the cutting shape of (m = 65)

and (m = 66). Whether the operation is a full cut or a partial cut (one point is left) is determined by

the installation position of the autocutter. The distance from print head to autocutter is about

24.5 mm {1 inch}.

TM-T90

The vertical motion unit is specified by GS P.

The cutting shapes of (m = 0,48) and (m = 1,49) are the same as the cutting shape of (m = 65)

and (m = 66). The setting is partial cut (one point is left) when the printer is shipped. It can be

changed to full cut setting by dealer’s option. The distance from print head to the autocutter is

about 14 mm {0.55 inch}.

After executing a paper cut, a paper feed for 1 mm {other than Japanese specifications:14/360

inches/Japanese specification:16/406 inches} before starting the next printing can provide the best

printing result without uneven paper feeding. If the printer is left until the next printing after

executing a paper cut, feeding paper more than 1 mm can avoid a paper jam inside the autocutter.

TM-L90

TM-L90 with Peeler:

The printer does not support this command.

Program Example for all printers Print Sample

PRINT #1, " AAAAA"; CHR$(&HA);

PRINT #1, CHR$(&H1D);"V";CHR$(66);CHR$(0); ←

Feed paper and cut

Paper fed to the cutting position and

AAAAA

partial cut (one point left uncut)

performed

1 2 ... 370 371 372 373 374 375 376 377 378 379 380 ... 760 761

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson TM-J2000 Spezifikationen Seite 375

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Epson TM-J2000