Epson TM-J2000 Spezifikationen Seite 636

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 761
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 635
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 636
[Explanation for memory switch 1] (a = 1):]
Power on notice specified by [Msw1-1] (the first bit):
The printer transmits the power on notice for the following processes:
Initializing by turning on the power by switch.
Initializing by hardware reset.
Initializing by software reset, such as by transmitting Function 2.
Initializing after the self test.
With a serial interface, when communication with the printer uses XON/XOFF control, the XOFF code may
interrupt the “Header to NUL” data string.
With a parallel interface, it is desirable for the host to be in a reverse idle state; however, because the host
computer cannot always be in the reverse idle state, it is necessary to enter reverse mode regularly to
watch for a power-on notice.
[Explanation for memory switch 2] (a = 2):]
Character code system is specified by [Msw2-3] (the third bit) as shown in the following table.:
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60, TM-U220
Power ON notice Hex Decimal Data quantity
Header 3BH 59 1 byte
Identifier 31H 49 1 byte
NUL 00H 0 1 byte
Character code system Number of characters
GB2312 7,580
GB18030 28,553
Seitenansicht 635
1 2 ... 631 632 633 634 635 636 637 638 639 640 641 ... 760 761

Kommentare zu diesen Handbüchern

Keine Kommentare