CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.05 p. 318
TM-P60
TM-P60 with Peeler
The function of Bit 0 of parameter (n) is not supported. Specify 1 to bit 0 of n or bits of
“Reserved.”
■ First byte (printer information)
• Bit 2 status is as follows:
• Bit 5 indicates the open/closed status of the peeler cover.
■ Basic second byte (printer information)
• Bits 0 and 3 of the second byte are not supported.
• If the cause of an automatically recoverable error (bit 6) is a "paper error," recovery from the error is
possible by opening and closing the peeler cover.
■ Basic third byte (paper sensor information)
• Bits 0 and 1 of the third byte are not supported.
• When the cover is open, the status of the roll paper end sensor (bit 2, 3) retains the value when the cover
was closed immediately before.
■ Basic fourth byte (paper sensor information)
n:
Bit Binary Hex Decimal Function
2 0 00 0 Does not go to offline by low battery.
1 04 4 Offline by low battery.
Kommentare zu diesen Handbüchern