CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.05 p. 553
GS ( k <Function 167>
[Name] QR Code: Set the size of module
[Format] ASCII GS ( k pL pH cn fn n
Hex 1D 28 6B 03 00 31 43 n
Decimal 29401073 0 49 67 n
[Range] (pL + pH × 256) = 3 (pL = 3, pH = 0)
cn = 49
fn = 67
TM-T88IV, TM-T70, TM-L90, TM-P60: 1 ≤ n ≤ 16
[Default] TM-T88IV, TM-T70, TM-L90, TM-P60: n = 3
[Description] Sets the size of the module for QR Code to n dots.
[Notes]
■ Settings of this function affect the processing of Functions 181 and 182.
■ Settings of this function are effective until ESC @ is executed, the printer is reset, or the power is turned
off.
■ n = width of a module = height of a module. (Because the QR code modules are square. )
[Model-dependent variations] TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60
TM-T90
This model does not support this function.
TM-T88IV
The setting unit is 1 dot. The size is set in units of 0.141 mm {1/180 inch}.
TM-T70
The setting unit is 1 dot.
For other than Japanese model, one dot corresponds to 0.141 mm {1/180 inch}.
For Japanese model, one dot corresponds to 0.125 mm {1/203 inch}.
Kommentare zu diesen Handbüchern