CONFIDENTIAL
Paper roll Bit-image commands FS q
Ver. 10.05 p. 266
■ After processing this command, the printer executes a software reset. Therefore, processing this command
enables the printer to be in the correct status when the power is turned on.
■ The limitations during processing of this command are as follows:
• Even if the PAPER FEED button is pressed, the printer does not feed paper.
• The real-time commands are not processed.
• Even if the ASB function is effective, the ASB status cannot be transmitted.
■ The NV bit image is printed by FS p.
■ Bit image data and print result are as follows:
■ Data is written to the non-volatile memory by this command. Note the following when using this
command.
• Do not turn off the power or reset the printer from the interface when this command is being
executed.
• The printer is BUSY when writing the data to the non-volatile memory. In this case, be sure not to
transmit data from the host because the printer does not receive data.
• Excessive use of this function may destroy the non-volatile memory. As a guideline, do not use any
combination of the following commands more than 10 times per day for writing data to the non-
volatile memory: GS ( A (part of functions), GS ( C (part of functions), GS ( E (part of functions), GS (
L / GS 8 L (part of functions), GS ( M (part of functions), GS g 0, FS g 1 ,FS q.
d1 dY+1 ... .
.
MSB
LSB
d2 dY+2 ... dk-2 MSB
LSB
.
.
.
.
... dk-1 MSB
LSB
dY dY× 2 ... dk MSB
LSB Y = yL + yH × 256
Kommentare zu diesen Handbüchern