CONFIDENTIAL
Paper roll Miscellaneous commands GS P
Ver. 10.05 p. 485
• Commands using x: ESC SP, ESC $, ESC W, ESC \ GS ( O and FS S.
• Commands using y: ESC 3, ESC J, ESC K, ESC W, GS $, GS V, GS ( O and GS \
■ In page mode, the following commands use x or y, when the starting position is set to the upper right or
lower left of the print area using ESC T.
• Commands using x: ESC 3, ESC J, ESC K, ESC W, GS $, GS ( O and GS \
• Commands using y: ESC SP, ESC $, ESC W, ESC \, FS S, GS ( O and GS V
■ Setting of this command is effective until ESC @ is executed, the printer is reset, or the power is turned
off.
■ The calculated result from combining this command with others is truncated to the minimum value of the
mechanical pitch.
■ This command does not affect the current setting values.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-L90, TM-T70
TM-J2000/J2100, TM-T90, TM-T88IV, TM-L90
The default values equal one dot pitch horizontally and 1/2 dot pitch vertically.
TM-T70
The default value corresponds to the 1 dot pitch for both horizontal/vertical.
Program Example for all printers Print Sample
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180); AAAAA
PRINT #1, CHR$(&H1B);"3";CHR$(30);
←
Set line spacing BBBBB
PRINT #1, "AAAAA"; CHR$(&HA); CCCCC 30/180-inch line spacing
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(90); DDDDD
PRINT #1, CHR$(&H1B);"3";CHR$(30); ←
Set line spacing 30/90-inch line spacing
PRINT #1, "CCCCC"; CHR$(&HA); EEEEE
PRINT #1, "DDDDD"; CHR$(&HA);
PRINT #1, "EEEEE"; CHR$(&HA);
Kommentare zu diesen Handbüchern