CONFIDENTIAL
Paper roll Kanji Commands FS –
Ver. 10.05 p. 510
FS –
SETTING COMMAND
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS – n
Hex 1C 2D n
Decimal 28 45 n
[Printers not featuring this command] None
[Range] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60: 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
TM-U230, TM-U220: n = 0, 1, 48, 49
[Default] n = 0
[Description] Turns on or off underline mode for multi-byte code character (Kanji-underline), using n as follows:
[Notes]
■ Settings of this command affect multilingual characters and user-defined characters.
■ The underline has the same color as the characters. The color can be selected by Function 48 of GS(N.
■ Even if Kanji underline mode is specified, 90° clockwise-rotation characters, white/black reverse characters,
and spaces skipped by HT, ESC $, or ESC \ are not underlined.
■ When a character size is changed, an underline width is not changed.
■ When underline mode is canceled, the following characters are not underlined; however, an underline
width set right before the mode is canceled remains.
■ Settings of this command are effective until FS ! is executed, ESC @ is executed, the printer is reset, or the
power is turned off.
■ Some printer models support Kanji underline mode with 2-dot width.
n Function
0, 48 Turns off Kanji-underline mode
1, 49 Turns on Kanji-underline mode (1-dot thick)
2, 50 Turns on Kanji-underline mode (2-dots thick)
Kommentare zu diesen Handbüchern