Epson TM-J2000 Spezifikationen Seite 727
- Seite / 761
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 727
• Sets a value in excess of 2.0 mm for the distance from the cutting position to the next print starting
position. If it is set to less than 2.0 mm, the paper feed operation may not be executed normally.
When "Layout reference (sm = "1," "2," "3")" and "vertical layout (sa = "0") are specified, even if
paper feed of about 155 mm is executed, if the print reference cannot be found, a paper error
occurs. This is caused by using paper that is outside the specifications. Loading paper that meets
the product specifications recovers from the error.
When "Layout reference (sm = "1," "2," "3")" and "vertical layout (sa ≠ "0") are specified, if any
of the following situations are detected, a paper layout error occurs. This is because the paper
used and the "vertical layout (sa)" setting value set with this function are different. After loading
the correct paper, DLE ENQ (n = 2) recovers from the error.
(a) When the next print reference is detected when paper feed that does not fulfill (sa setting value - 1.25
mm) after the print reference is passed.
(b)When the next eject reference is detected when paper feed that does not fulfill (sa setting value - 1.25
mm) after the eject reference is passed.
(c) When the next print reference is not found even when paper feed that fulfills (sa setting value + 1.25 mm)
after the print reference is passed.
(d)When the next eject reference is not found even when paper feed that fulfills (sa setting value + 1.25 mm)
after the eject reference is passed.
(e) With mechanical initialization when memory switch [Msw8-6] is on, in any of the following cases
• When the next print reference is detected when paper feed that does not fulfill (sa setting
value - 1.25 mm - special machine value (setting value of <Function 80> of this command)) is
being executed after mechanical initialization.
• When the next print reference is not found even when paper feed that fulfills (sa setting
value + 1.25 mm + special machine value (setting value of <Function 80> of this command))
is executed after mechanical initialization.
• Irrespective of whether the correct paper is used, if a paper layout error occurs when printing the first
sheet after mechanical initialization (when the peeler cover is closed, when the power is turned on, or the
printer is reset), the paper may not be set in the correct position. When it is difficult to position the paper,
it is possible to avoid paper layout errors by changing the setting value of <Function 80>. Refer to
<Function 80> of this command for details of this command.
- Paper Roll Printers 1
- PROPRIETARY COMMAND SYSTEM 7
- COMMAND CLASSIFICATION 8
- Real-time Commands 10
- OVERVIEW OF DATA PROCESSING 10
- DEFINITIONS 12
- TM-T88IV SUPPORTED COMMANDS 15
- TM-T90 SUPPORTED COMMANDS 21
- TM-T70 SUPPORTED COMMANDS 27
- TM-L90 SUPPORTED COMMANDS 32
- TM-U220 SUPPORTED COMMANDS 44
- TM-U230 SUPPORTED COMMANDS 48
- TM-P60 SUPPORTED COMMANDS 51
- COMMANDS ARRANGED BY FUNCTION 64
- PRINT COMMANDS 65
- FF (in page mode) 67
- LINE SPACING COMMANDS 82
- CHARACTER COMMANDS 89
- 6/180-inch character spacing 92
- ESC & 99
- CONFIDENTIAL 100
- SETTING COMMAND 104
- ← Black 120
- L pH fn m <Function 48> 128
- L pH fn m 128
- L pH fn m <Function 49> 130
- L pH fn m <Function 50> 132
- L pH fn m a 132
- PANEL BUTTON COMMANDS 139
- PAPER SENSOR COMMANDS 144
- PRINT POSITION COMMANDS 150
- EXECUTING COMMAND 151
- BIT IMAGE COMMANDS 179
- GS ( L GS 8 L 198
- EXECUTING + SETTING 198
- H (m, fn, and [parameters]) 199
- L pH mfn 210
- L pH mfnx y 212
- L pH mfnd1d2 218
- L pH mfnd1d2d3 220
- L pH m fn kc1 kc2 221
- X+1 dX+2 ... dXx2 225
- L + xH ✕ 256) 225
- L pH m fn kc1 kc2 x y 231
- Y+1 ... : 248
- Y+2 ... dk-2 248
- L + xH × 256) 255
- L + xH × 256) = 64 256
- L + xH × 256) = 64, 128 259
- L + yH × 256 266
- L + xH × 256) 270
- MSB LSB MSB LSB 270
- Normal mode 271
- ✻ and GS / 278
- STATUS COMMANDS 287
- Transmits offline status 297
- Transmits ink status A 297
- BAR CODE COMMANDS 331
- MACRO FUNCTION COMMANDS 359
- MECHANISM CONTROL COMMANDS 365
- ESC < 366
- MISCELLANEOUS COMMANDS 378
- DLE DC4 (fn = 1) 385
- DLE DC4 (fn = 2) 388
- DLE DC4 (fn = 7) 391
- DLE DC4 (fn = 8) 396
- L pH fn n c t1 t2 405
- L pH fn a b n c t1 t2 406
- L pH fn m d1d2d3d4 430
- L pH fn m d 433
- GS ( K <Function 48> 445
- GS ( K <Function 49> 448
- GS ( K <Function 50> 451
- GS ( K <Function 97> 453
- ← <Function 48> 455
- L + wyH × 256) = 458
- × 256) = 0] 458
- L + pH × 256) 459
- Transmits printer ID 473
- GS z 0 (TM-L90 w/ Peeler) 498
- KANJI COMMANDS 501
- Select JIS code system 504
- Specify Kanji mode 504
- Cancel Kanji mode 504
- FS & 505
- TWO DIMENSION CODE COMMANDS 525
- GS ( k <Function 065> 533
- L pH cn fn n 533
- GS ( k <Function 066> 535
- GS ( k <Function 067> 536
- GS ( k <Function 068> 538
- GS ( k <Function 069> 540
- L pH cn fn m n 540
- GS ( k <Function 070> 543
- GS ( k <Function 081> 546
- L pH cn fn m 546
- GS ( k <Function 082> 549
- GS ( k <Function 165> 552
- L pH cn fn n1 n2 552
- GS ( k <Function 167> 553
- GS ( k <Function 169> 555
- GS ( k <Function 181> 559
- GS ( k <Function 182> 562
- GS ( k <Function 265> 565
- GS ( k <Function 281> 567
- GS ( k <Function 282> 570
- GS ( k <Function 367> 573
- GS ( k <Function 371> 574
- GS ( k <Function 381> 577
- GS ( k <Function 382> 579
- GS ( k <Function 467> 582
- GS ( k <Function 471> 583
- GS ( k <Function 472> 584
- GS ( k <Function 481> 594
- GS ( k <Function 482> 600
- CUSTOMIZE COMMANDS 604
- L + nH × 256) bytes 609
- L pH m fn b c1 c2 615
- L pH mfnb 620
- L pH m fn b d1 d2 d3 624
- L pH fn d1 d2 631
- L pH fn d1 d2 d3 632
- 31 50 50 50 50 50 50 50 49 635
- L pH fn a <Function 4> 646
- L pH fn a 646
- L + nH × 256) 651
- 70 Light 655
- 85 Medium 655
- 100 Dark 655
- L + nH × 256) Print density 655
- L + nH × 256) Print control 657
- L + nH × 256) Print speed 658
- L pH fn a <Function 6> 663
- L pH fn a 663
- L pH fn ad1d2 666
- MSB LSB MSB LSB 672
- L pH fn c1 c2 673
- L pH fn a d1...dk 674
- L pH 0B a d1...dk 674
- L pH 11 a d1...dk 674
- L pH 0B a 678
- L pH 11 a 678
- L pH fn d1 d2 d3 685
- L pH fn n 692
- L pH fn m 701
- COUNTER PRINTING COMMANDS 704
- PRINTING PAPER COMMANDS 715
- L pH fn n 729
- FS ( L <Function 48 > 732
- FS ( L <Function 65 > 737
- FS ( L <Function 66 > 740
- FS ( L <Function 67 > 742
- CHARACTER CODE TABLES 746
- USING BIT VALUE TABLES 760
Verwandte Produkte und Handbücher für Drucken & Scannen Epson TM-J2000
Drucken & Scannen Epson C11C617001 - Stylus C88 Color Inkjet Printer Bedienungsanleitung
(57 Seiten)
(57 Seiten)
Drucken & Scannen Epson GP-M830 Bedienungsanleitung
(118 Seiten)
(118 Seiten)
Drucken & Scannen Epson C31C391A8770 - TM U230P Two-color Dot-matrix Printer Bedienungsanleitung
(18 Seiten)
(18 Seiten)
(426 Seiten)
Drucken & Scannen Epson TM-U210B Spezifikationen
(127 Seiten)
(127 Seiten)
Drucken & Scannen Epson EMP 600 Bedienungshandbuch
(122 Seiten)
(122 Seiten)
(240 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.702 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern