Epson TM-J2000 Spezifikationen Seite 353

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 761
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 352
CONFIDENTIAL
Paper roll Bar code commands GS k
Ver. 10.05 p. 353
TM-J2000/J2100
With UPC-E (m = 1, 66), 11 or 12 bytes can be used for the amount of data to process.
Only capital letters (ASCII = A ~ D/Hexadecimal = 41H ~ 44H/Decimal = 65 ~ 68) can be used for the
start/stop character with CODABAR (m = 6, 71).
TM-T90, TM-L90
With UPC-E (m = 1, 66), 11 or 12 bytes can be used for the amount of data to process.
Only capital letters (ASCII = A ~ D/Hexadecimal = 41H ~ 44H/Decimal = 65 ~ 68) can be used for the
start/stop character with CODABAR (m = 6, 71).
When printing ladder bar code (bar code rotated by 90 degrees in page mode) the printer starts
actual printing after it reaches control speed for printing ladder bar code. It is needed to feed
paper amount of 10 dots or less in this operation.
If the memory switch [Msw 8-5] is ON, the printer inserts a space data automatically. Therefore,
the print area is [bar code data + space of the dots as following table] when executing this
command.
TM-T88IV, TM-T70
With UPC-E (m = 1, 66), 11 or 12 bytes can be used for the amount of data to process.
Only capital letters (ASCII = A ~ D/Hexadecimal = 41H ~ 44H/Decimal = 65 ~ 68) and small letters
(ASCII = a ~ d/Hexadecimal = 61H ~ 64H/Decimal = 97 ~ 100 ) can be used for the start/stop character
with CODABAR (m = 6, 71).
Model Right spacing Left spacing Notes
TM-T90 (other than Japanese model) 15 dots 15 dots 15 dots = approximately 2.12 mm
[15/180 inch]
TM-T90 (Japanese model) 19 dots 19 dots 19 dots = approximately 2.38 mm
[19/180 inch]
TM-L90 19 dots 19 dots 19 dots = approximately 2.38 mm
[19/180 inch]
Seitenansicht 352
1 2 ... 348 349 350 351 352 353 354 355 356 357 358 ... 760 761

Kommentare zu diesen Handbüchern

Keine Kommentare