CONFIDENTIAL
Paper roll Bar code commands GS k
Ver. 10.05 p. 343
■ If the amount of data to process is 6 bytes, the number system character (NSC) 0 is added automatically.
■ If the amount of data to process is any of (7, 8, 11, 12 bytes), the first data (d1) is processed as number
system character (NSC) so 0 must be specified.
■ If n is out of the specified range or if n is an odd number when ITF bar code system (m = 70) is selected,
this command is canceled and the following data is processed as normal data.
■ Modular check character (1 character) is processed as follows:
• If the amount of data to process is any of (6, 7, 11 bytes), it is added automatically.
• The 12th byte data is processed as a modular check character when processing data is 12 byte. In this
case, modular check character is not checked.
• If the amount of data to process is 8 bytes, the 8th byte data is processed as a modular check character.
However, the modular check character is not checked.
• Modular check characters are data to decide the bar pattern; they are not printing data.
■ Prints a 6-column short code that except NSC and modular check characters.
• If the amount of data to process is 6 bytes, the shortened 6-digit code specified by (d1...d6) is printed.
If the amount of data to process is either of (7, 8 bytes), the shortened 6-digit code specified by
(d2...d7) is printed.
• If the amount of data to process is either of (11, 12 bytes), a shortened 6-digit code generated from the
(d2...d11) data in accordance with the table below is printed.
Specify 0 at indicated data by "-" in the table.
Data of transmitted by host PC Printing data
d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 D1 D2 D3 D4 D5 D6
0
~ 90 ~ 9000--0 ~ 90 ~ 90 ~ 9 d2 d3 d9 d10 d11 0
0
~ 90 ~ 9100--0 ~ 90 ~ 90 ~ 9 d2 d3 d9 d10 d11 1
0
~ 90 ~ 9200--0 ~ 90 ~ 90 ~ 9 d2 d3 d9 d10 d11 2
0
~ 90 ~ 93 ~ 900---0 ~ 90 ~ 9 d2 d3 d4 d10 d11 3
0
~ 90 ~ 90 ~ 91 ~ 90 - - - -0 ~ 9 d2 d3 d4 d5 d11 4
0
~ 90 ~ 90 ~ 90 ~ 91 ~ 9- - - -5 ~ 9 d2 d3 d4 d5 d6 d11
Kommentare zu diesen Handbüchern