Epson F2000 Bedienungsanleitung PDF herunterladen (Seite 55)

Tips for Administrator 55

* A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection

may terminate when the lease or address expires.

Print Client Settings

Create separate settings for each of the Service Name > RAW (Port 9100), ENPC,

and

SNMP options using Setup > Security > IPsec/Access Control > Group policy settings

that differ from those used by the administrator. Group policies are applied in order from

Group Policy 1; when setting up policies for both administrators and print clients, order the

list so that the group policies for administrators precede those for print clients.

Note that EpsonNet Config (Windows/Mac OS) will be unable to detect the printer if

separate group policies are not created for the Service Name > ENPC, SNMP options.

Sample settings are shown below.

1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config

to find the printer.

2. A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection

may terminate when the lease or address expires.

Note:

Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port

Number.

Option Setting

Group Policy n (n = 1–10) Enable

Access Control Access Permission

Remote Address (Host)

Enter the administrator client IP

address

Option Setting

RAW (Port 9100) ENPC SNMP

Group Policy n

(n = 1–10)

Enable

Access Control Access Permission

Remote Address

(Host)

Enter the print client IP address (prefix length can be used to specify

range if desired).

Example (IPv4): 192.168.0.0/24

Method of Choose

Port

Service Name

Service Name RAW (Port 9100) ENPC SNMP

1 2 ... 50 51 52 53 54 55 56

Keine Kommentare

Epson F2000 Bedienungsanleitung Seite 55