Epson F2000 Bedienungsanleitung PDF herunterladen (Seite 54)

Tips for Administrator 54

1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config

to find the printer.

2. A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection

may terminate when the lease or address expires.

Note:

Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port

Number.

Sample 3

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Group Policy settings for each client.

Refusing Access from Unauthorized Clients

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Default Policy settings as follows:

Administrator Client Settings

Separate settings must be created for each Group Policy in IPsec/Access Control.

Group policies are applied in order from Group Policy 1.

Option Setting

RAW (Port 9100) ENPC SNMP

Group Policy n

(n = 1–10)

Enable

Access Control Access Permission

Remote Address

(Host)

Enter the print client IP address (prefix length can be used to specify

range if desired).

Example (IPv4): 192.168.0.0/24

Method of Choose

Port

Service Name

Service Name RAW (Port 9100) ENPC SNMP

Option Setting

IPsec/Access Control Enable

Default Policy > Access Control Access Refuse

1 2 ... 49 50 51 52 53 54 55 56

Keine Kommentare

Epson F2000 Bedienungsanleitung Seite 54