Epson F2000 Bedienungsanleitung PDF herunterladen (Seite 53)

Tips for Administrator 53

Product Security Policies

Start the product Remote Manager from your computer, open the Setup tab, and adjust

Security > IPsec/Access Control settings for security policies that match how the product

will be used.

Note:

We recommend that the product be assigned a static IP address for secure access using IPsec or

Access Control. Settings will be invalidated if the IP address changes.

Sample 1

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Default Policy settings as follows:

Sample 2

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Group Policy settings for each client.

Refusing Access from Unauthorized Clients

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Default Policy settings as follows:

Print Client Settings

Separate IPsec/Access Control > Group Policy settings must be created for each of the

Service Name > RAW (Port 9100), ENPC,

and SNMP options as shown in the example

below. Group policies are applied in order from Group Policy 1.

Option Setting

IPsec/Access Control Enable

Default Policy > Access Control Use IPsec

Pre-Shared Key Enter a key (maximum 127

alphanumeric characters)

Option Setting

IPsec/Access Control Enable

Default Policy > Access Control Access Refuse

1 2 ... 48 49 50 51 52 53 54 55 56

Keine Kommentare

Epson F2000 Bedienungsanleitung Seite 53