Epson F2000 Bedienungsanleitung PDF herunterladen (Seite 46)

Troubleshooting 46

Troubleshooting

General Problems

Cannot configure the network interface or cannot print from the

network.

Cannot print even if you have assigned the IP address to the

computer and the printer.

Unable to start EpsonNet Config with.

Cause What to do

The printer settings or network

settings may be wrong.

First, check to see if you can print a status sheet, as

described in “Printing a Network Status Sheet (Large

Format Inkjet Printers)” on page 47. If you can print a

status sheet, check the network settings; otherwise, set

the interface mode of the printer’s control panel to Auto

or Option.

Cause What to do

You have assigned an IP address to

the computer manually, but you

assigned the IP address to the

printer by Automatic Private IP

Addressing (APIPA).

Assign the printer’s IP address so that it belongs to the

same segment as the computer. Use EpsonNet Config

and the printer’s control panel.

Cause What to do

You have added or deleted

protocols after installing EpsonNet

Config.

Uninstall EpsonNet Config and then reinstall it. See

“Installing EpsonNet Config” on page 33.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 55 56

Keine Kommentare

Epson F2000 Bedienungsanleitung Seite 46