Epson TM-J8000 Spezifikationen PDF herunterladen (Seite 157)

Rev. A Disassembly, Assembly, and Adjustment 6-47

TM-J8000/J8000P Technical Manual

Confidential

2. When you set the Roll paper unit on the frame, make sure one shaft contacts the right side of the unit

and the other shaft is completely attached to the cut out portion of the frame. During this process, do

not push the Roll paper unit hard because the gears on the unit could be damaged.

Figure 6-70 Contacting the shafts to the frame

3. Before you secure the Roll paper unit, lubricate the five screws with O-10. This is important to

protect the Main circuit board unit from the metallic particles from the screw hole.

Figure 6-71 Lubricating the screws

4. During installation, make sure no cables are caught.

Cartridge

frame unit is

removed in

this illustration

to show you

the shaft.

Shaft contacts the frame

Shaft is attached to the cut out portion

Lubricate with O-10

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 189 190

Keine Kommentare

Epson TM-J8000 Spezifikationen Seite 157