Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
TM-P60
Specification
STANDARD
69 68
E
GS $ nL nH
[Name] Set absolute vertical print position in page mode
[Format] ASCII GS $ n
L nH
Hex 1D 24 nL nH
Decimal 29 36 nL nH
[Range] 0 ≤ (n
L + nH × 256) ≤ 65535 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255)
[Description] • In page mode, moves the vertical print position to [(n
L + nH × 256) × (vertical or
horizontal motion unit)] from the starting position set with ESC T.
GS ( C pL pH m fn b [c1 c2] [d1...dk]
[Name] Edit NV user memory
[Description] • Edits the data in the NV user memory.
• pL, pH specify (pL + pH × 256) as the number of bytes after pH (m, fn, b, [c1 c2], and
[d1...dk]).
• fn specifies the function.
• c1, c2 specify the key code (which identifies the record).
• [d1...dk] specify the process of each function.
fn Format
Function
No.
Function name
0, 48 GS ( C pL pH m fn b c1 c2 0 Delete the specified record.
1, 49 GS ( C pL pH m fn b c1 c2 d1...dk 1 Store the data in the specified record.
2, 50 GS ( C pL pH m fn b c1 c2 2 Transmit the data in the specified record.
3, 51 GS ( C pL pH m fn b 3 Transmit capacity of the NV user memory
currently being used.
4, 52 GS ( C pL pH m fn b 4 Transmit the remaining capacity of the NV
user memory.
5, 53 GS ( C pL pH m fn b 5 Transmit the key code list.
6, 54 GS ( C pL pH m fn b d1 d2 d3 6 Delete all data in the NV user memory.
[Notes] • Frequent write command executions by an NV memory write command may damage
the NV memory. Therefore, it is recommended to write to the NV memory less than
10 times a day.
• If the power is turned off or the printer is reset via an interface while this command is
being executed, the printer may go into an abnormal condition. Be careful not to turn
the power off or let the printer be reset via an interface while this command is being
executed.
• While processing this command, the printer is BUSY while writing the data to the NV
memory and stops receiving data. Therefore, be sure not to transmit data, including
the real-time commands while the printer is BUSY.
• When <Function 2, 3, 4, or 5> is transmitted, the data following must not be
transmitted until the status is received. And, it will be necessary to perform the
ESC/POS Handshaking Protocol procedures when using <Function 2 or 5>.
• The number of items registered in the NV user memory must be 50 or fewer to keep
the boot up time of the printer short enough.
• The boot up time of the printer is longer by one second maximum when the number
of items registered is 50.
G
(107 Seiten)
(422 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern