Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
TM-P60
Specification
(STANDARD)
6 5
1.9 Printing and Cutting Positions
Emergency cutter position
utocutter blade position
Center of the print dotline
Paper feed direction
pproximately
6.4 mm
pproximately
10.9 mm
Figure 1.8.1 Printing and Cutting Positions
NOTE: Numeric values used here are typical values; the values may vary slightly as a result of paper
slack or variations in the paper. Take this into account when setting the cutting position of
the autocutter.
Paper feeding (approx. 1 mm) is performed automatically before printing for the first time
after
autocutting in order to prevent character deformation. Because of that, be aware that
there is approximately 1 mm space added to the 7 mm after the autocutting point when
continuous printing is performed.
1.10 Internal Buffer
1) Receive buffer: 128 bytes
2) NV area: 384 KB
The NV area is the memory area both for the NV graphics and the
NV user memory.
3) Page mode area: Approximately 63 KB
G
Kommentare zu diesen Handbüchern