Confidential
5
TM-P60
Specification
(STANDARD)
TITLE
SHEET
REVISION
E
NO.
NEXT SHEET
App.6 App.5
B.2 Cleaning the Autocutter
If the adhesive agent on the labels sticks to the autocutter, it may dull the blade. In this case, clean
the blade as described below:
1) Be sure that the printer is turned off. Open the roll paper cover.
2) Collect and remove accumulated adhesive materials with a flathead screwdriver.
Adhesive Materials on the Blade
Removing Adhesive Materials with Flathead Screwdriver
Warning:
Be sure not to touch the edge of the autocutter directly with your fingers; otherwise,
your fingers might be injured.
NOTE: Be sure to remove as much of the adhesive agent as possible from the cutter blade edge,
but you do not need to polish the blade until it is absolutely clean. It is recommended not
to use an alcohol solvent. If an alcohol solvent is used, the adhesive agent might begin to
be dissolved, which can reduce the efficiency of the printer.
Kommentare zu diesen Handbüchern