Epson NX127 Wartungshandbuch PDF herunterladen (Seite 22)

Epson Stylus NX125/T13/NX130 series Revision F

Disassembly/Assembly Routing FFC/cables 22

Confidential

Head FFC

 When installing the Head FFC to the Carriage, route the Head FFC through the rib (x1) on the rear of the Carriage, and connect the Head FFC to the CR

Encoder.

 When installing the Head FFC to the Main Frame, route the Head FFC in the procedure below and connect it to the Main Board.

1. Align the fold line of the Head FFC with the rib (x1) of the Holder FFC, and route the FFC through the Holder FFC as shown in the figure above.

2. Route the Head FFC through the hole of the Main Frame.

3. Align the hooks (x4) of the Holder FFC with the holes (x4) on the Main Frame, and secure the Holder FFC to the Main Frame by sliding it to the 80-digit side.

CR Encoder

Holder FFC

Head FFC

Hole

Step 2

Main Frame

Holder FFC

Head FFC

Step 1

Fold line

Main Frame

Step 3

Rib

Hook

Head FFC

Holder FFC

PF Motor

Set the Ferrite Core of the PF Motor cable into the ribs of the Frame Base.

PF Motor

PF Motor cable

Ferrite Core

Rib

Panel Board (T13 series)

When routing the Panel FFC, follow the instructions below.

1. Route it through the Ferrite Core and the hook (x1).

2. Secure the FFC with double-sided tape (x2) to the Upper Housing, and then secure the Ferrite core with the hooks (x2).

Panel FFC

Upper Housing

Ferrite Core

Upper Housing

Panel Board

Panel FFC

Hook

Double-sided tape (8 x 20 mm)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson NX127 Wartungshandbuch Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Epson NX127