Epson NX127 Wartungshandbuch PDF herunterladen (Seite 17)

Epson Stylus NX125/T13/NX130 series Revision F

Disassembly/Assembly Details of Disassembling/Assembling by Parts/Unit 17

Confidential

Power Supply Unit

Route the Power Supply Unit cable through the hole of the Frame

Base.

Power Supply Unit Power Supply Unit

Hole

Power Supply Unit Cable

EJ Frame Assy

Tighten the screws in the order indicated in figure above.

EJ Frame Assy

C.B.P-TITE SCREW 3x8 (5.0 ± 0.5 kgf·cm)

Cap Unit

When installing the Cap Unit, follow the instruction below.

1. Temporarily secure the Cleaner Case Spring to the hook and dowel of the Frame Base.

2. Insert the Waste Ink Tube to the Cap Unit until point A (p 19) is hidden.

3. Install the Cap Unit to the Frame Base, and attach the Cleaner Case Spring which is secured temporary earlier to the hook on the Cap Unit.

4. Insert one leg of the Cleaner Lever Spring to the hole of the Frame Base, and secure it to the dowel of the Frame Base, then secure the other leg

to the protrusion of the Lever Cleaner.

Cleaner Lever Spring

Dowel Hole

Lever Cleaner

Protrusion

Waste Ink Tube

Point A

Cleaner Case Spring

Hook

Cleaner Case Spring

Cap Unit

Dowel for temporarily secure

Frame Base

Step 1

Step 2

Step 3

Step 4

Hook

Main Frame

 When installing the Grounding Spring of the lower part of the 80-digit side, follow the instruction below.

1. Insert the tip of the spring to the hole of the Frame Base.

2. Attach the eye of the spring to the Bracket and secure the other eye to the hook on the Main Frame.

 When installing the Extension Spring of the lower part of the 0-digit side, attach the tip of the Extension Spring to the hole of the Frame Base

first. Then attach the leg of the spring to the cutout of the Main Frame from the left side as seen from the rear of the printer.

 Tighten the screws in the order indicated in figure above.

Hook

Grounding Spring

Hole

Bracket

Main

Frame

Lower part of 80-column side

Main Frame

Main FrameLeft Side Right Side

C.B.P-TITE SCREW 3x8 (5.0 ± 0.5 kgf·cm)

C.B.S-TITE SCREW 3x5 (7.5 ± 0.5 kgf·cm)

Cutout

Hole

Lower part of 0-column side

Extension Spring

Printhead

Insert the folded part of the Head FFC into the groove of the FFC

Cover.

FFC Cover

Head FFC

Groove

FFC Cover

Groove

Head FFC

CR Scale

 When installing the CR Scale, confirm that the arrows on both

the edges of the CR Scale face upward.

 When installing the Extension Spring, be sure to attach it with

its leg facing the rear of the printer.

CR Scale

Extension Spring

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson NX127 Wartungshandbuch Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Epson NX127