Epson NX127 Wartungshandbuch PDF herunterladen (Seite 19)

Epson Stylus NX125/T13/NX130 series Revision F

Disassembly/Assembly Details of Disassembling/Assembling by Parts/Unit 19

Confidential

Gear Pump Idle/ Gear Pump/ Bracket Pump/ Roller Pump/ Waste Ink Tube/ Pump Housing

When assembling the Pump Assy, follow the instructions below.

1. Make six points on the Waste Ink Tube.

2. Insert the Waste Ink Tube in the hole of the Pump Housing with the red line of the tube set as shown in the figure above.

3. Secure point C of the Waste Ink Tube to the point C of the Pump Housing.

4. Secure point D of the Waste Ink Tube to the point D of the Pump Housing.

5. Install the Roller Pump to the Bracket Pump.

6. Set the Waste Ink Tube inside the Bracket Pump, and install the Bracket Pump to the Pump Housing.

7. Rotate the Bracket Pump shaft and make sure that the Roller Pump shaft moves to both ends in the groove.

8. Make sure that point D is placed in the correct position.

9. Install the Gear Pump.

10. Install the Gear Pump Idle.

11. Install the Lever Pick Clutch.

Step 10, 11

Lever Pick Clutch

Gear Pump Idle

Step 7

Roller Pump shaft

Groove

Bracket Pump shaft

Step 6

Pump Housing

Bracket Pump

Waste Ink Tube

Pump Housing

Point D

Step 4, 8

Step 2,3

Point C

Pump Housing

Waste Ink Tube

Step 1

Waste Ink Tube

ABC D EF

1 mm

110.5

1 mm 1101 mm 391 mm

1 mm

Step 5

Bracket Pump

Roller Pump

Step 9

Gear Pump

Cap Unit side Waste Ink Tray Assy side

Pump Assy

 Route the Ink Tube along the ribs on the Frame Base.

 After installing the Ink Tube, make sure that no part of the tube

is pressed flat.

Rib

Waste Ink Tube

Waste Ink Tray Assy

When installing the Waste Ink Tube, pay attention to the following

instructions.

 Align and secure the point E (p 19) of the Waste Ink Tube to

the hook on the Frame Base.

 Insert the Holder Tube up to the point F (p 19) of the Waste Ink

Tube, and insert the holder into the Duct Tube End.

Waste Ink Tube

Point E

Point F

Holder Tube

Waste Ink Unit

Hook

Duct Tube End

Holder Tube

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson NX127 Wartungshandbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Epson NX127