
EPSON 2–1
SED1200 Series
SED1200
Series
FEATURES
• Internal display RAM to hold 20 8-bit character codes.
• Internal character generator
– CGROM: 160 JIS ASCII characters.
– CGRAM: 4 user programmable 5×8 pixel
characters
– Font: 5×7 pixel characters plus the underline
cursor.
– JIS character set using SED1200F
0A/SED1200D0A
– ASCII character set using SED1200F0B/
SED1200D
0B
• Internal LCD driver circuitry
– 50 segment driver lines
– 16 common driver lines
– Total size: Two lines of 10 characters each
(maximum). One line of 20 characters
(LCD panel dependent)
• CPU interface
– 4-bit CPU data bus
– 13 display control commands
• Low external component count
– Built in RC oscillator (using one external feedback
resistor)
– Built in LCD driver voltage-divider network.
• Implemented using low power CMOS technology
– TTL compatible CPU interface
• Power supply
– Logic: 2.5 V to 5.5 V
– LCD: 3.5 V to 5.5 V
• 80 pin QFP package SED1200F and chip (SED1200D)
OVERVIEW
The SED1200 is a Liquid Crystal Display (LCD) character
display controller-driver, capable of directly driving
displays as large as 2 lines of 10 5×8 pixel characters,
with a minimum of external components.
The SED1200 has an internal character generator (CG)
consisting of 160 JIS ASCII characters in ROM and four
user definable characters in RAM. The internal CG, a
versatile set of cursor and display control commands,
mean that the system CPU is only responsible for the
display data and commands, and not for the LCD display
itself.
Kommentare zu diesen Handbüchern