Epson EMP-X3 Bedienungsanleitung PDF herunterladen (Seite 18)

Adjusting the Image Quality

Adjusting Computer Images and RGB Video Images

Automatic setup detects analogue RGB signals coming from a connected

computer, and automatically adjusts these signals so that the optimum

images can be obtained.

Automatic setup involves adjustment of the following three items:

Trackingg, Position and Sync (synchronisation)g.

If "Auto Setup" in the "Signal" menu is set to "Off", automatic setup is not

carried out. In this case, press the [Auto] button on the remote control or

the [Enter] button on the projector's control panel to make the adjustment

while computer or RGB video images are being projected.

If vertical stripes appear in the projected

computer or RGB video images, and this cannot

be fixed using automatic setup, you will need to

adjust the Trackingg manually using the

following procedure.

PROCEDURE

Select "Signal" from the configuration menu, and

then select "Tracking".

For details on this operation, refer to

"Using the Configuration

". sp.32

Check the buttons you can use and the operations they perform

in the guide at the bottom of the screen.

Automatic Setup

•If you press the [Auto] button on the remote control, or

the [Enter] button on the control panel, while

performing other functions such as E-zoom or Freeze,

these functions are canceled and then the adjustment is

made.

•Sometimes the signals may not be adjusted correctly

depending on the type of computer or RGB video

signals being input. In such cases, use the

configuration menu commands to adjust the tracking

and sync settings manually. sp.14

Using the remote control

Using the control panel

Adjusting the Tracking

Using the remote control

Using the control panel

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 84 85

Keine Kommentare

Epson EMP-X3 Bedienungsanleitung Seite 18