Epson EMP-X3 Bedienungsanleitung PDF herunterladen (Seite 53)

Problems Solving

No images appear

Projection stops automatically

Problems relating to images

Check Remedy

Was the [Power] button pressed? Press the [Power] button to turn the power on.

Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the

projector's power cable correctly. sp.iii

Check that your power supply socket is working.

Is A/V Mute mode active? Press the [A/V Mute] button on the remote control to cancel the mute. sp.20

Have the configuration menu settings

been made correctly?

Reset all of the settings. "Reset" - "Reset All" sp.40

Is the projected image completely black? Some input images, such as screen savers, may be completely black.

Are the image signal format settings

correct?

If a composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu

command to select the signal format. "Signal" - "Video Signal" sp.35

Check Remedy

Is "Sleep Mode" set to "On"? When the "Sleep Mode" menu command has been set to "On", the lamp turns off automatically if no

operations are carried out for about 30 minutes while no video signal is being input. The Power indicator

is lit orange at this time. Press the [Power] button to turn the power on. If you do not want sleep mode to

be used, change the "Sleep Mode" setting to "Off". "Extended" - "Operation" - "Sleep Mode" sp.38

Only when projecting computer images

Only when projecting images

from a video source

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 84 85

Keine Kommentare

Epson EMP-X3 Bedienungsanleitung Seite 53