Epson EMP-X3 Bedienungsanleitung PDF herunterladen (Seite 51)

Problems Solving

Lamp or Temp indicator flashes orange

: lit : flashing : off

Status Cause Remedy or Status

High temperature warning (This is not an abnormality, but if the temperature rises too high again, projection will stop

automatically.)

•Check that the air filters and air exhaust vent are clear and that they are not up against a surface

such as a wall.

•If the air filters are clogged, clean or replace them. sp.57, p.63

Lamp replacement notification Replace the lamp with a new one. sp.59

If you continue to use the lamp after it has passed the replacement period, the possibility that the

lamp may break will increase. Replace the lamp with a new one as soon as possible. The Power

indicator status will vary depending on the projector status at the time.

•If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No

Help" on the following page.

•If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided in

the "International Warranty Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.

Warning

Red

Orange

Power

Orange

Power

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 84 85

Keine Kommentare

Epson EMP-X3 Bedienungsanleitung Seite 51