Epson C82305/06 (Serial I/F) Spezifikationen PDF herunterladen (Seite 208)

REV.-B

3.2.5 Disassembling the PRINTER MECHANISM

This section describes how to disassemble the main components of the PRINTER MECHANISM.

3.2.5.1 Removing the MOTOR, CR

1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).

2. Remove the printer spring (778 gm) from the base frame and the MOTOR, CR frame.

3. Remove the TIMING BELT from the BELT PULLEY.

4. Remove the MOTOR, CR frame from the HOUSING ASSY., LOWER.

5. Remove the two CBS(O) (M3 X 6) screws that hold the MOTOR, CR to the FRAME ASSY., CR, MOTOR.

Remove the MOTOR, CR

h/.--MOTOR, CR

EXTENSION SPRING, 778

FRAME ASSY., CR,

MOTOR

CBS(O) (M3

6) Screws

FRAME, MAIN, BASE

Figure 3-11. Removing the MOTOR, CR

Points to Note for Assembly and Adjustment

See Section 3.2.5.13 for details on arranging and positioning the motor cable.

After removing the MOTOR, CR from the FRAME ASSY., CR, MOTOR, you must adjust the MOTOR,

CR backlash (see Section 4.1

.l).

You also must adjust the bidirectional print position to ensure

bidirectional printing is correctly aligned (see Section 4.2).

3-10

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 306 307

Keine Kommentare

Epson C82305/06 (Serial I/F) Spezifikationen Seite 208