Epson S1C33210 Bedienungsanleitung Seite 492

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 559
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 491
V DMA BLOCK: IDMA (Intelligent DMA)
B-V-3-4 EPSON S1C33210 FUNCTION PART
DSINC[1:0]: Destination address control (D[29:28]/3rd Word)
Set the destination address update format.
If the format is set for "address fixed" (00), the destination address is not changed by the performance of a data
transfer operation. Even when transferring multiple data, the transfer data is always written to the same address.
If the format is set for "address increment" (11 or 10) in single and successive transfer modes, the destination
address is incremented by an amount equal to the data size set by DATSIZ when one data transfer is completed.
If the format is set for "address decrement" (01), the destination address is decremented in the same way.
In block transfer mode as well, the destination address is incremented or decremented when one data unit is
transferred. However, if the set format is "10", the destination address that has been incremented during a block
transfer recycles back to the initial value when the block transfer is completed.
DSADR[27:0]: Destination address (D[27:0]/3rd Word)
Use these bits to set the starting address at the destination of transfer. The content set here is updated according
to the setting of DSINC.
Since the control information is placed in RAM, it can be rewritten. However, before rewriting the content of
this information, make sure that no DMA transfer is generated in the channel whose information you are going
to rewrite.
Seitenansicht 491
1 2 ... 487 488 489 490 491 492 493 494 495 496 497 ... 558 559

Kommentare zu diesen Handbüchern

Keine Kommentare