Epson Equity III+ Bedienungsanleitung PDF herunterladen (Seite 46)

Figure 4-7.

Inserting an option card

Once the connector pins are sitting in the connector slot, push the card

downward firmly (but carefully) to fully insert it. If the card does not go

in smoothly, do not force it-pull it all the way out and try again, keep-

ing it straight.

Secure the adapter plate on the end of the card to the back of the com-

puter with the retaining screw.

Removing an Option Card

To remove an option card, follow the same basic procedure you used to

install it. Remove the screw holding the adapter and pull the card straight up

and out of the connector. Then carefully wrap the card, preferably with the

original packing materials, and place it inside its box for safe storage. Cover

the end of the empty option slot with the original metal cover and retaining

screw. If you modified anything in the post-installation setup (see below) be

sure to change it back.

4-6

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 79 80

Keine Kommentare

Epson Equity III+ Bedienungsanleitung Seite 46