Epson Stylus Pro 9000 Spezifikationen PDF herunterladen (Seite 77)

4-2

4-2 | Resolving Problems

Using Hex Dump Mode

You can use the printer’s hex dump mode to identify problems if you know

how to interpret hex code. Or, you can fax the hex printout to a technical

support representative.

Make sure the printer has paper loaded and is turned off. Then follow these

steps:

1. Press and hold the

Pause

button while you press the

Power

button to

turn on the printer.

HEX DUMP=PRINT

appears on the display.

2. Press the

Enter

button.

3. Send your problem file to the printer.

The data in the print buffer is printed with 16-byte hex data in the left

column and corresponding ASCII characters in the right column. If the

last data is less than 16 bytes, you need to press the

Pause

button to

print it.

4. After you’re finished using hex dump mode, press the

Power

button to

turn the printer off and exit maintenance mode.

Improving Print Quality

You can often improve print quality by doing the following:

•

Run a nozzle check and cleaning cycle. See page 3-1 for instructions.

•

Align the print head. See page 3-3 for instructions.

•

When you send a print job, make sure your print options are set

correctly. For more information, see the RIP Station 5100 User Guide (if

you have the RIP) or Appendix B or C (if you’re using the EPSON

printer driver).

If none of these suggestions help, try the solutions on the following page.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 164 165

Keine Kommentare

Epson Stylus Pro 9000 Spezifikationen Seite 77