Epson Stylus C82 Spezifikationen PDF herunterladen (Seite 49)

44

Problem Solving

■

For Windows 2000 or XP, don’t

select

Block

under

Control Panel>

System> Hardware> Driver

Signing

; select

Ignore

or

Warn

instead.

■

If you’re using Windows 98, Me,

2000, or XP with a USB

connection, make sure your system

was not upgraded from Windows

95; the USB driver may not install

correctly.

■

Make sure the Universal Serial Bus

Controller is working properly. See

your Windows online help system

for details.

■

If you’re printing over a network,

see your on-screen Reference Guide

for instructions on configuring your

printer for use on a network.

■

In Windows, make sure your

printer is selected as the default

printer in the Printers utility.

Printer Problems

The P power light is on, but nothing

prints.

■

Make sure the interface cable

is connected securely and that

the cable meets the system

requirements on page 59 or

page 60.

■

Run a printer check as described

on page 42. If the check page

prints, make sure your printer

software is installed correctly.

■

If you’re printing on a network, you

need to set up your printer for

network printing, as described in

your on-screen Reference Guide.

The printer sounds as though it is

printing, but nothing prints.

■

The print head nozzles may need

cleaning; see page 25 for

instructions.

■

The printer won’t operate properly

if it’s tilted or at an angle. Place it

on a flat, stable surface.

Your printer makes noise when you

turn it on or after it has been sitting

for awhile.

Your printer is performing routine

maintenance.

Printing is too slow.

Make sure your system meets the

requirements beginning on page 59. If

you’re printing a high-resolution image,

you need more than the minimum

requirements listed.

You may also need to:

■

Clear space on your hard disk or

run a defragmentation utility.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 76 77

Kommentare zu diesen Handbüchern

Keine Kommentare