Epson Stylus C82 Spezifikationen PDF herunterladen (Seite 47)

Problem Solving

Running a Printer Check

You can run a printer check to determine whether a problem comes from the printer

itself or some other source. Follow these steps:

1. Make sure both the printer and computer are turned off. Then disconnect the

interface cable from the printer.

2. Make sure letter-size or larger paper is loaded in the printer.

3. Hold down the ) paper button, then press and release the Ppower button.

Continue holding down the ) paper button until the Ppower light starts to

flash, then release it.

The printer prints one page showing its ROM version number, ink counter, and a

nozzle check pattern. Only the nozzle check pattern is shown below. (If the

pattern has gaps in its dots, you need to clean the print head; see page 25.)

4. To end the check, turn the printer off after it prints the check page. Then

reconnect the interface cable and turn on your printer and computer.

If the check page prints, the problem probably lies in your software settings, the

interface cable, or your computer. Another possibility is that your printer software

may not be installed correctly.

If the check page doesn’t print, you may have a problem with your printer. Try the

suggestions in “Problems and Solutions” beginning on page 43. If nothing seems to

work, contact your dealer or EPSON as described on page 51.

P is off

The printer is not receiving power. Try these solutions:

■

Make sure the printer is turned on.

■

Turn off the printer, plug in the power cord securely, and turn the

printer on again.

■

Make sure the outlet is working and is not controlled by a switch or

timer. If in doubt, try another outlet.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 76 77

Keine Kommentare

Epson Stylus C82 Spezifikationen Seite 47