Epson AcuLaser C4000 Bedienungsanleitung PDF herunterladen (Seite 6)

(6/22)

EPSON AcuLaser C4000 Quick Reference

Hard Disk Full

The optional Hard Disk Drive is full and you

cannot save any data. Delete the

unnecessary data from the Hard Disk Drive.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. For

instruction about accessing the control panel

menus, see “How to access the control panel

menus.”

HDD Check

The printer is checking the Hard Disk Drive.

HDD Format ***%

The HDD is being formatted. The progress

of the format is shown as ***%.

Image Optimum

There is insufficient memory to print the

page at the specified print quality. The

printer automatically lowers the print

quality so that it can continue printing. If the

quality of the printout is not acceptable, try

simplifying the page by limiting the number

of graphics or reducing the number and size

of fonts.

To clear this error, select Clear Warning

from the control panel’s Reset Menu. For

instruction about accessing the control panel

menus, see “How to access the control panel

menus.”

Turn the Image Optimum setting off on the

control panel’s Printing Menu if you do not

want the printer to automatically lower the

print quality to continue printing.

You may need to increase the amount of

printer memory to be able to print at the

desired print quality for your document. For

more information on adding memory, see

“Memory Modules” in the Reference Guide.

Install Fuser

There is no fuser unit installed or the fuser

unit is not installed properly. Turn off the

printer and install the fuser unit if it is not

installed.

If a fuser unit is already installed, turn off the

printer, open cover A, then open cover D.

Then close cover A and open cover B.

Remove the fuser unit, then reinstall it

properly. Close covers D and B. The error

clears automatically if the fuser unit is

properly installed.

If the error is not cleared, the fuser unit is out

of order. Replace it with a new fuser unit.

Install LC1

The paper tray of the standard paper cassette

is not installed, or not installed properly.

Install the paper cassette correctly to clear

this error.

Install LC2

The paper trays of the optional Large

Capacity Paper Unit are not installed, or not

installed properly. Install the paper trays

correctly to clear this error.

Install Photoconductor

There is no photoconductor unit installed or

the photoconductor unit is not installed

properly. Turn off the printer and install the

photoconductor unit if it is not installed.

If a photoconductor unit is already installed,

turn off the printer, open cover A, then open

cover D. Remove the photoconductor unit,

then reinstall it properly. Close covers D and

A. The error clears automatically if the

photoconductor unit is properly installed.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare