Epson 740i Bedienungsanleitung PDF herunterladen (Seite 39)

Running a Printer Operation Check

You can run a printer operation check to determine whether the problem comes from

the printer or some other source.

1. Make sure both the printer and computer are turned off.

2. Disconnect the interface cable from the printer.

3. Make sure paper is loaded in the printer.

Caution:

Load paper that’s at least 8.27 inches (210 mm) wide. This prevents

ink from spraying inside the printer and smudging your printouts.

4. Hold down the

E load/eject button

and press the

Ppower button.

Continue holding down the

E load/eject button until the

Ppower

light starts to flash, then release it.

The printer prints its ROM version

number and a nozzle check pattern

(shown on page 22).

5. After it prints the check page, turn off

the printer. Then reconnect the interface cable and turn on your printer and

computer.

If the results are satisfactory, the problem lies in your software settings, the interface

cable, or your computer.

If the check page does not print correctly, you may have a problem with your printer.

See the suggestions on page 34 for more information.

power

button

load/eject button

power

light

740i.book Page 33 Thursday, April 15, 1999 2:11 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 68 69

Keine Kommentare

Epson 740i Bedienungsanleitung Seite 39