Epson 740i Bedienungsanleitung PDF herunterladen (Seite 27)

Using the Control Panel

1. Make sure the printer is turned on but not

printing, and the

B black and

A color ink

out lights are off.

2. Press the

R cleaning button and hold it

down for 3 seconds. Cleaning takes a little

over a minute, during which the printer

makes some noise and the

Ppower light

flashes.

Caution:

Never turn off the printer while the

power light is flashing, unless

the printer hasn’t moved or made noise for more than 5 minutes.

3. After the

Ppower light stops flashing, print a page to test the print quality and

reset the cleaning cycle.

If you’re connected directly to the printer, run a nozzle check. Go to step 4.

If you’re printing over a network, open an application and print a document

containing black and color data. Then go to step 8.

4. Start an application, open a document, and access the printer settings dialog box

as described on page 9.

5. Click the Utility icon. You see the Utility menu.

6. Make sure paper is loaded in the printer, click the Nozzle Check icon, and click

Next. The nozzle check pattern prints; see page 22 for details.

7. If the nozzle check pattern is filled in completely, click Finish. If the pattern is

missing dots, click Clean to clean again.

8. If you don’t see any improvement in the print quality after cleaning two or three

times, check the solutions on page 36.

cleaning button

740i.book Page 21 Thursday, April 15, 1999 2:11 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 68 69

Keine Kommentare

Epson 740i Bedienungsanleitung Seite 27