Epson NX Wartungshandbuch PDF herunterladen (Seite 62)

Removing SlMMs

Removing

and

Replacing

Subassemblies

If you need to remove SIMMs from the computer, follow these steps:

Remove the computer’s cover as described on page 3-2.

Remove any option cards that may be blocking access to the SIMM sockets (see

page 3-5).

Use your fingers or a small screwdriver to pull away the metal tabs that secure the

SIMM at each end. Be careful not to pull the tabs too far, or they may bend.

Metal

Tab

Figure 3-7 Removing SIMMs

As you pull away the tabs, the SIMM falls to the side of its socket as shown in Figure

3-7.

When the SIMM is at an angle, carefully remove the SIMM and store it in an

anti-static bag.

Repeat steps 3 and 4 for removing additional SIMMs.

Replace any option cards removed (see page 3-7).

Replace the computer’s cover (see page 3-4).

Run the SETUP program immediately to update the computer’s configuration with the

new memory information.

Epson

NX Service

Manual 3-9

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 153 154

Keine Kommentare

Epson NX Wartungshandbuch Seite 62