Epson PowerLite 76c Betriebsanweisung PDF herunterladen (Seite 39)

Projecting 39

■ If your image looks like or , you need to adjust the

keystone correction value. Press the or buttons on the

projector to correct the shape of the image. After correction, your

image will be slightly smaller.

You can also make keystone adjustments using the projector’s Settings

menu. See page 59.

Adjusting the Brightness

The brightness of an image depends on the source you are projecting

and the amount of light in the room. If the image is too bright or not

bright enough, here are two ways you can adjust it:

■ Change the Brightness setting in the Image menu. See page 54.

■ Select Low or High for the Brightness Control option in the

Settings menu. (See page 59.) Low brightness mode extends the

life of the lamp and decreases the fan noise.

Correcting Computer Images

If you’ve connected a computer and the image doesn’t look right, or it

doesn’t fit properly on the screen, press the

Auto button on the

remote control. This automatically resets the projector’s tracking,

sync, resolution, and position settings. You must be projecting a

computer image for this button to have any effect. Additionally, if the

Auto Setup option in the Signal menu is set to OFF, the Auto

function will not work. See page 57.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 110 111

Keine Kommentare

Epson PowerLite 76c Betriebsanweisung Seite 39