Epson C82363 Spezifikationen Seite 1

EPSON Type B EthernetInterface CardC82362* (10Base2/10BaseT)C82363*/C82364* (10BaseT/100BaseTX)All rights reserved. No part of this publication may be

2 IntroductionCautions and Notes cCautions must be observed to avoid damage to your equipment.Note:Notes contain important information and useful tips

6-6 Using the Ethernet Card with Windows 95 and Windows 986. Type the NetBIOS name (up to 15 characters), the workgroup name (up to 15 characters), an

Using the Ethernet Card with Windows 95 and Windows 98 6-7Setting up your printerThis section explains how to set up your printer and Ethernet card.1.

6-8 Using the Ethernet Card with Windows 95 and Windows 98Chap6.fm Page 8 Friday, August 21, 1998 11:20 AM

Using the Ethernet Card with Windows NT 7-1Chapter 7Using the Ethernet Card with Windows NTThis chapter explains how to install protocols when using t

7-2 Using the Ethernet Card with Windows NTOverall stepsFollow these steps to set up and use the Ethernet card with Windows NT. Go to the indicated ch

Using the Ethernet Card with Windows NT 7-3Setting up your printerNote:You must install the correct printer drivers before starting these operations.1

7-4 Using the Ethernet Card with Windows NT6. The Add LPR compatible printer dialog box appears. Type the IP address of the Ethernet card and the name

Using the Ethernet Card with Windows NT 7-53. Change the type of access of Everyone to ADD & READ (RWX)(RX), and click OK.Printing via the LPR por

7-6 Using the Ethernet Card with Windows NT4. Select LPR Port from the Available Printer Port list, and click the New Port button.Note:You cannot use

Using the Ethernet Card with Windows NT 7-7Installing NetBEUI in Windows NT 3.511. Double-click the Network icon in the Control Panel to display the N

Introduction 3Operating Environments Supported operating systems and network protocolsSee the following chapters for more information.❑ NetWare 3.1x/4

7-8 Using the Ethernet Card with Windows NTInstalling NetBEUI in Windows NT 4.01. Double-click the Network icon in the Control Panel. Click the Protoc

Using the Ethernet Card with Windows NT 7-9Note:❑ If you have not assigned the IP address on the TCP/IP menu of EPSON Net!2 for Windows or with the ar

7-10 Using the Ethernet Card with Windows NT3. Select Enable to use NetBEUI.Note:If Disable is on, all NetBEUI related functions will stop. 4. Type th

Using the Ethernet Card with Windows NT 7-11Setting up your printerThis section explains how to set up your printer on network workstations.For Window

7-12 Using the Ethernet Card with Windows NTUsing the NET USE command to see the Ethernet cardWhen you are using Windows NT Server and using NetBEUI t

Using the Ethernet Card with OS/2 8-1Chapter 8Using the Ethernet Card with OS/2This chapter explains how to configure and use the Ethernet card with a

8-2 Using the Ethernet Card with OS/2Printing with TCP/IP This section explains TCP/IP printing using the LPR port supported by standard OS/2.1. Doubl

Using the Ethernet Card with OS/2 8-33. Click the Autostart tab. Select lprportd in the Services to autostart list. Check the Autostart service check

8-4 Using the Ethernet Card with OS/27. Select Properties from the control menu, then click the Output Port tab.8. From the Output Port list box, sele

Using the Ethernet Card with OS/2 8-5Printing with NetBEUI Follow these steps to set up printing on the workstations:1. Create a printer.2. Connect to

4 IntroductionEnvironments for the setup utilityEPSON Net!2 for Windows/Macintosh❑ EPSON Net!2 for Windows You can configure the Ethernet card for TCP

8-6 Using the Ethernet Card with OS/2Chap8.fm Page 6 Friday, August 21, 1998 11:27 AM

Using the Ethernet Card with UNIX 9-1Chapter 9Using the Ethernet Card with UNIXThis chapter explains how to set up the printer for different UNIX syst

9-2 Using the Ethernet Card with UNIXSetting up for SunSoft Solaris 2.4 or laterIn the following steps, substitute the name you will use to configure

Using the Ethernet Card with UNIX 9-3Setting up for SunOS 4.1.4 or laterIn the following steps, substitute the name you will use to configure your pri

9-4 Using the Ethernet Card with UNIXSetting up for IBM AIX 3.2.5 or later and 4.1.3 or laterIn the following steps, substitute the name you will use

Using the Ethernet Card with UNIX 9-5Setting up for HP-UX 9.05 or laterIn the following steps, substitute the name you will use to configure your prin

9-6 Using the Ethernet Card with UNIXSetting up for SCO UNIX 4.2 or later (Open Server) In the following steps, substitute the name you will use to co

Using the Ethernet Card with UNIX 9-77. Specify that the RLP extended function (valid when the print server is SCO-UNIX) will not be used.For example

9-8 Using the Ethernet Card with UNIX230 User logged in.200 Type set to I.ftp> put binary file200 PORT command successful.150 Opening data connecti

Using EPSON Net!2 and the Ethernet Card Home Page 10-1Chapter 10Using EPSON Net!2 and the Ethernet Card Home PageThis chapter describes the functions

Introduction 5Environments for EPSON Status Monitor 2The protocols that must be installed to run EPSON Status Monitor 2 vary depending on your operati

10-2 Using EPSON Net!2 and the Ethernet Card Home PageLaunching the BrowserSelect the printer you want to configure on the EPSON Net!2 screen, and the

Using EPSON Net!2 and the Ethernet Card Home Page 10-3Time-out time:Use this to set the time-out for communication with the Ethernet card(s). You can

10-4 Using EPSON Net!2 and the Ethernet Card Home PageCreating print queuesUse these settings when creating a print queue and setting the queue inform

Using EPSON Net!2 and the Ethernet Card Home Page 10-5Viewing the Ethernet card parametersThe Information tab shows the current Ethernet card paramete

10-6 Using EPSON Net!2 and the Ethernet Card Home PageChanging TCP/IP SettingsSpecify TCP/IP settings on the TCP/IP tab as described below. See Chapte

Using EPSON Net!2 and the Ethernet Card Home Page 10-7Making basic NetWare settingsYou can make basic NetWare settings on the NetWare Basic tab. See C

10-8 Using EPSON Net!2 and the Ethernet Card Home PageChanging settings for Print Server modeMake settings on the Print Server tab when you use the Et

Using EPSON Net!2 and the Ethernet Card Home Page 10-9Changing settings for Remote Printer modeMake settings on the Remote Printer tab when you use th

10-10 Using EPSON Net!2 and the Ethernet Card Home PageSetting the time-out timeClick the Option button to set the time-out used for communication wit

Using EPSON Net!2 and the Ethernet Card Home Page 10-11IP Address Configuration settingsAppleTalk Configuration settingsItems ExplanationsIP Address

6 IntroductionLocal PrinterConnect the printer directly to the printer port of your computer.For Windows 95/Windows 98:You need to enable bi-direction

10-12 Using EPSON Net!2 and the Ethernet Card Home PageUsing the Ethernet Card Home Page This section describes how to configure the Ethernet card usi

Using EPSON Net!2 and the Ethernet Card Home Page 10-13Viewing general information about the cardThe initial page shows the general information about

10-14 Using EPSON Net!2 and the Ethernet Card Home PagePrint Server ModeRemote Printer ModeTCP/IP Items ExplanationsPrimary File Server Name Select th

Using EPSON Net!2 and the Ethernet Card Home Page 10-15AppleTalk NetBEUI Changing optional settingsYou can change any of the optional settings to upda

10-16 Using EPSON Net!2 and the Ethernet Card Home PageReset optionsYou can initialize or reset the Ethernet card from the Reset screen. The update is

Using EPSON Net!2 and the Ethernet Card Home Page 10-17Monitoring a Windows shared printer (supported under Windows NT only)To monitor a shared printe

10-18 Using EPSON Net!2 and the Ethernet Card Home PageChap10.fm Page 18 Friday, August 21, 1998 11:32 AM

EPSON Status Monitor 2 (Windows Only) 11-1Chapter 11 EPSON Status Monitor 2 (Windows Only)EPSON Status Monitor 2 is a utility program that: ❑ Monitors

11-2 EPSON Status Monitor 2 (Windows Only)If you use your printer in a NetWare environment, you need to connect to the print queue that is assigned to

EPSON Status Monitor 2 (Windows Only) 11-32. Click Install EPSON Status Monitor 2, and then click the right arrow button.Note:If the screen above do

Introduction 7TCP/IP printer (Windows 95/Windows 98)/LPR printer (Windows NT 3.51/4.0)To connect to and share the printer without using the server:For

11-4 EPSON Status Monitor 2 (Windows Only)3. Read the on-screen instructions and click Next.4. Click Next, or if you want to change the destination di

EPSON Status Monitor 2 (Windows Only) 11-56. Select Monitor to monitor network printers that do not have drivers installed in your computer. Select Do

11-6 EPSON Status Monitor 2 (Windows Only)7. Select Allow monitoring to monitor Windows shared printers. If you don’t want to monitor Windows shared p

EPSON Status Monitor 2 (Windows Only) 11-79. Select Yes and click Finish to restart Windows when you see the following screen.Selecting a Printer to M

11-8 EPSON Status Monitor 2 (Windows Only)2. Double-click Epson_tcpip_printers, so that available printers equipped with Ethernet cards in the same se

EPSON Status Monitor 2 (Windows Only) 11-94. Follow the instructions that the Wizard gives you on the screen. If you are required to install the print

11-10 EPSON Status Monitor 2 (Windows Only)Changing Status Monitor 2 Settings You can change EPSON Status Monitor 2 settings as described below.1. Ope

EPSON Status Monitor 2 (Windows Only) 11-11You can also start EPSON Status Monitor 2 by clicking Start, pointing to Programs and EPSON, and then click

11-12 EPSON Status Monitor 2 (Windows Only)Using the Basic Features of EPSON Status Monitor 2 This section describes the basic operation and functions

EPSON Status Monitor 2 (Windows Only) 11-133. Click OK to close the dialog box after checking the printer status or making preference settings.Note:If

8 IntroductionInstallation OverviewPerform the following steps to install and configure the Ethernet card. See the indicated chapters for detailed inf

11-14 EPSON Status Monitor 2 (Windows Only)Using the main windowYou can use the main window to see the current status of the printers. The color of th

EPSON Status Monitor 2 (Windows Only) 11-15Click Printer Status for detailed information on the selected printer’s status, or click Job Status to get

11-16 EPSON Status Monitor 2 (Windows Only)Printer NameProvides the names of the installed printers. You can add or delete printers to be monitored by

EPSON Status Monitor 2 (Windows Only) 11-17To monitor network printers that do not have drivers installed in your computer, add uninstalled network pr

11-18 EPSON Status Monitor 2 (Windows Only)Adding uninstalled network printersBefore you start monitoring uninstalled network printers, you need to ad

EPSON Status Monitor 2 (Windows Only) 11-19Checking the current statusYou can check the status of the selected printer on the Current Status tab. If a

11-20 EPSON Status Monitor 2 (Windows Only)Checking the Consumables information(EPSON Stylus COLOR/EPSON Stylus Photo series)The information given on

EPSON Status Monitor 2 (Windows Only) 11-21Checking the Consumables information (EPL Series)The information given on the Consumables tab varies accord

11-22 EPSON Status Monitor 2 (Windows Only)Viewing Printer InformationThe Printer Information tab provides you with information about the selected pri

EPSON Status Monitor 2 (Windows Only) 11-23Setting monitoring preferencesTo make specific monitoring settings, right-click a printer and select Monito

Getting Started 1-1Chapter 1Getting StartedThis chapter explains Ethernet card operation and hardware installation.Ethernet Card Features The status l

11-24 EPSON Status Monitor 2 (Windows Only)Background Monitoring Icon and Status Alert When you select Monitor this printer in the Monitoring Preferen

EPSON Status Monitor 2 (Windows Only) 11-25Note:If you turn off the monitoring feature, the background monitoring icon disappears from the taskbar and

11-26 EPSON Status Monitor 2 (Windows Only)Stopping Monitoring EPSON Status Monitor 2 automatically monitors the printer or printers you designate. To

EPSON Status Monitor 2 (Windows Only) 11-273. Click Printer and click Close.Note: You can restart the Status Monitor by clicking Monitor from restart

11-28 EPSON Status Monitor 2 (Windows Only)Uninstalling EPSON Status Monitor 2 You can remove EPSON Status Monitor 2 from your computer by following t

EPSON Status Monitor 2 (Windows Only) 11-292. Click Start on the taskbar, point to Settings, and then click Control Panel.3. Double-click Add/Remove P

11-30 EPSON Status Monitor 2 (Windows Only)4. Click EPSON Status Monitor 2 and click the Add/Remove button. 5. Follow the instructions on the screen.F

EPSON Status Monitor 2 (Windows Only) 11-313. Follow the instructions on the screen.Tips for Using EPSON Status Monitor 2 Controlling the packet traff

11-32 EPSON Status Monitor 2 (Windows Only)About uninstalled network printersThe Uninstalled Network Printers menu shows network printers that do not

Troubleshooting 12-1Chapter 12 TroubleshootingGeneral Problems You cannot configure the Ethernet card or print from the network.Cause What to doPrinte

1-2 Getting StartedC82363* and C82364*Here is a brief explanation of the red and green status lights:Here is a brief explanation of the yellow link se

12-2 TroubleshootingNote:If you have a direct connection to the Internet (not dial-up), you may need to apply to the InterNIC to obtain an IP address.

Troubleshooting 12-3Problems Specific to Your Network Environment Windows NT environmentClients cannot print with TCP/IP via Windows NT Server 3.51 (N

12-4 TroubleshootingWindows 95 and Windows 98 environments A dial-up connection dialog box appears when printing with TCP/IP via EPSON Status Monitor

Troubleshooting 12-5NetWare environmentYou cannot print correctly in NDS Print Server mode or NDS Remote Printer mode under Windows 95 or Windows 98.C

12-6 TroubleshootingMacintosh environment You are likely to be charged for the line connection depending on the number of hops you set.Cause What to d

Troubleshooting 12-7Problems Using EPSON Status Monitor 2 The Current Status menu shows the message “A communication error has occurred.”Cause What to

12-8 TroubleshootingThe status information does not match the real status of the printer. Cause What to doEPSON Status Monitor 2 monitors the printer

Troubleshooting 12-9NetWare print servers cannot be monitored beyond routers.Cause What to doThe number of hops is set to 0. Change the number of hops

12-10 TroubleshootingCannot print when using EPSON TCP/IP in Windows 95 or Windows 98.Cause What to doAn incompatible or invalid printer name is typed

Troubleshooting 12-11NetWare printers cannot be monitored when Allow monitoring is selected for monitoring Windows shared printers under Windows NT 3.

Getting Started 1-3Hardware Installation This section explains how to install the Ethernet card in your printer. You must install the interface card i

12-12 TroubleshootingChap12.fm Page 12 Friday, August 21, 1998 2:00 PM

Uninstalling EPSON Net!2 A-1Appendix AUninstalling EPSON Net!2 Follow the steps below to uninstall EPSON Net!2 for Windows.For Windows 95, 98, and NT

A-2 Uninstalling EPSON Net!2For Windows NT 3.51 1. Double-click the Uninstall icon in the EPSON Net!2 window.2. When the message “Are you sure you wa

Specifications B-1Appendix BSpecificationsEnvironmental Operating temperature: 5° to 35° C (41° to 95° F)Storage temperature: -30° to 70° C (-22° to 1

B-2 SpecificationsRegulatory Approvals EMC FCC part 15B Class AEN55022 Class AEN50082-1IEC801-2 ESD ImmunityIEC801-3 Radiated ImmunityIEC801-4 EFT/Bur

Index I-1AAppleTalk, 5-1, 5-5, 5-7zone, 5-5, 5-7arp, 3-8 to 3-10BBindery emulation, 4-1BOOTP, 3-12, 3-15Browser, starting, 3-14, 4-36, 5-6CConnecting

Index I-2LLights, status, 1-1 to 1-2LPR port, 7-3 to 7-4, 7-6MMAC address, 10-5, 10-13NNDS settings, 4-24, 4-33, 4-36NetBEUI, 6-3 to 6-7, 7-8 to 7-12,

Index I-3TTCP/IP, 3-1 to 3-15, 6-2, 7-2 to 7-6, 8-2 to 8-4Time-out time, 10-3, 10-10Troubleshooting, 12-1 to 12-11UUninstalling EPSON Net!2, A-1 to A-

Index I-4DelmonteIX.fm Page 4 Tuesday, August 25, 1998 9:35 AM

FCC Compliance StatementFor United States UsersThis equipment has been tested and found to comply with the limits for a Class A digital device, pursua

iiFront.fm Page ii Friday, August 21, 1998 12:07 PM

1-4 Getting Started3. Insert the card into the interface slot of your EPSON printer, then tighten the screws to secure the card in the slot.Note:The l

Getting Started 1-52 Connect the network cableOnce the Ethernet card is installed in your printer, attach the network cable. The card automatically

1-6 Getting Started cCaution:❑ After turning off the printer, wait until the status lights go out before turning it back on; otherwise, the Ethernet c

Getting Started 1-72. Turn on the printer while holding down the status sheet button for about five seconds. When the red and green status lights on t

1-8 Getting StartedChap1.fm Page 8 Tuesday, August 25, 1998 9:34 AM

Installing EPSON Net!2 2-1Chapter 2Installing EPSON Net!2You can configure the Ethernet card for TCP/IP, NetWare, or AppleTalk using EPSON Net!2. By s

2-2 Installing EPSON Net!23. Select Install EPSON Net!2 on the installer screen, then click the right arrow button.4. Follow the on-screen instructi

Installing EPSON Net!2 2-3Installing EPSON Net!2 for Macintosh To install EPSON Net!2 for Macintosh, follow these steps:1. Insert the Ethernet card so

2-4 Installing EPSON Net!2Chap2.fm Page 4 Friday, August 21, 1998 12:32 PM

Setting the IP Address 3-1Chapter 3Setting the IP AddressTo use the Ethernet card with TCP/IP, you first need to set its IP address.Overview Follow th

Contents iiiContentsIntroductionEnclosed Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Opera

3-2 Setting the IP AddressFor Windows 95 and Windows 98Follow the steps below to install TCP/IP.1. Double-click the Network icon in the Control Panel,

Setting the IP Address 3-34. Select Microsoft from the list of manufacturers and TCP/IP from the Network protocols list. Then click OK.5. Double-click

3-4 Setting the IP Address1. Double-click the Network icon in the Control Panel to check if the TCP/IP Protocol and Microsoft TCP/IP Printing are inst

Setting the IP Address 3-52. If the TCP/IP protocol and Microsoft TCP/IP Printing are not listed, click Add Software (for NT 3.51) or Add (for NT 4.0

3-6 Setting the IP AddressWindows NT 4.0Select TCP/IP ProtocolSelect Microsoft TCP/IP PrintingChap3.fm Page 6 Friday, August 21, 1998 11:11 AM

Setting the IP Address 3-73. If you continue installing the TCP/IP protocol, the TCP/IP Configuration dialog box appears, and you can set the IP addr

3-8 Setting the IP AddressSetting the IP Address Using the arp Command If you are using UNIX, OS/2, or peer-to-peer networking in Windows (95, 98, or

Setting the IP Address 3-93. If the card is reachable, you see results like the following (the exact form of the message depends on your operating sys

3-10 Setting the IP Address1. From the command line, type: arp -s [IP address] [MAC address]Example: arp -s 192.135.223.6 00-00-48-93-00-00Note:Althou

Setting the IP Address 3-11Note:When using TCP/IP, EPSON Net!2 shows the Ethernet card information for the same segment by default. To see the Etherne

iv ContentsChapter 4 Using the Ethernet Card with NetWareOverview . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-12 Setting the IP AddressNote:❑ If you have connected more than one printer with the same type of Ethernet card to the network, you can identify a c

Setting the IP Address 3-13Note:❑ If you will be configuring the Ethernet card using the card’s home page, you must assign an IP address manually here

3-14 Setting the IP AddressChanging the IP Address Using the Ethernet Card Home PageAfter you have configured the Ethernet card for TCP/IP using EPSON

Setting the IP Address 3-152. Click TCP/IP under Network on the Configuration menu to view the TCP/IP setting screen.3. Under Get IP Address, select

3-16 Setting the IP AddressChap3.fm Page 16 Friday, August 21, 1998 11:11 AM

Using the Ethernet Card with NetWare 4-1Chapter 4Using the Ethernet Card with NetWareThis chapter explains how to configure the Ethernet card for use

4-2 Using the Ethernet Card with NetWare5. Set the NetWare mode using EPSON Net!2.About modesYou can choose from Print Server, Remote Printer, or Stan

Using the Ethernet Card with NetWare 4-3Standby mode (factory default):Standby is the default mode. With this mode, all NetWare related functions are

4-4 Using the Ethernet Card with NetWareCreating print queues in a file server1. From any NetWare client, log in to the network with supervisor privil

Using the Ethernet Card with NetWare 4-53. From the Print Server list, select the print server name that you just entered and press Enter. 4. From the

Contents vChapter 6 Using the Ethernet Card with Windows 95 and Windows 98Overview . . . . . . . . . . . . . . . . . . . . .

4-6 Using the Ethernet Card with NetWare8. Highlight Type and press Enter. Select Local Parallel, LPT1.9. Press Esc; then press Enter to save changes.

Using the Ethernet Card with NetWare 4-71. Turn on the printer.2. Run EPSON Net!2 from the Start menu.3. The EPSON Net!2 dialog box appears showing a

4-8 Using the Ethernet Card with NetWare4. Click the NetWare Basic tab and make the following settings.Frame type: Select one from the following: Auto

Using the Ethernet Card with NetWare 4-9Primary file server name:Select the server where you created the queue.Password:Type any new password up to 19

4-10 Using the Ethernet Card with NetWare2. Run PCONSOLE. From the Available Options screen, select Print Queue Information and press Enter.3. Press t

Using the Ethernet Card with NetWare 4-114. From the Print Server Information list, select Print Server Configuration and press Enter.5. Select Printe

4-12 Using the Ethernet Card with NetWare7. From the Printer configuration screen, type the printer name. Then, highlight Type and press Enter. Select

Using the Ethernet Card with NetWare 4-139. Select Queues Serviced by Printer from the Print Server Configuration menu and press Enter.10. Select the

4-14 Using the Ethernet Card with NetWare3. The EPSON Net!2 dialog box appears showing a list of interface cards on the network. Select the printer y

Using the Ethernet Card with NetWare 4-154. Click the NetWare Basic tab and make the following settings.Frame type: Select one from the following: Aut

vi ContentsChapter 9 Using the Ethernet Card with UNIXSetting Up Different UNIX Systems Using the lpr Command . . . . 9-1Setting up for SunSoft

4-16 Using the Ethernet Card with NetWarePrimary print server:Select the print server name you have created.Printer port number:Type the same port num

Using the Ethernet Card with NetWare 4-17❑ If the bindery context path has not been set, or if you want to switch the bindery context to print in a di

4-18 Using the Ethernet Card with NetWare3. Create a printer:Click the directory context icon (or Bindery context), and select Object, then Create, an

Using the Ethernet Card with NetWare 4-195. Create a print queue:Click the directory context icon (or Bindery context), and select Object, then Create

4-20 Using the Ethernet Card with NetWare7. Double-click the Printer Object icon on the NetWare Administrator screen.8. The Printer dialog box appear

Using the Ethernet Card with NetWare 4-2112. From the printer object list, select the printer object you want to assign and click OK.13. Double-click

4-22 Using the Ethernet Card with NetWareConfiguring the Ethernet card in Print Server modeThis section explains how to configure the card in Print Se

Using the Ethernet Card with NetWare 4-23Note:❑ If you have connected more than one printer with the same type of Ethernet card to the network, you ca

4-24 Using the Ethernet Card with NetWareNDS Context:NDS context is the Object rank in the Directory tree. Type the container object (up to 255 charac

Using the Ethernet Card with NetWare 4-256. Click OK to save your changes. If the message “Configuration is successfully done” appears on your screen,

Contents viiChapter 11 EPSON Status Monitor 2 (Windows Only)Using EPSON Status Monitor 2 in NetWare. . . . . . . . . . . . . . 11-1Ins

4-26 Using the Ethernet Card with NetWare4. Create a print server:Click the directory context icon (or Bindery context), and select Object, then Creat

Using the Ethernet Card with NetWare 4-276. The objects you have just created are added to the directory context (or Bindery context).7. Double-click

4-28 Using the Ethernet Card with NetWare8. The Printer dialog box appears. Click Assignments and then click Add.9. From the print queue list, select

Using the Ethernet Card with NetWare 4-2911. Double-click the Print Server Object icon on the NetWare Administrator screen.12. The Print Server dialog

4-30 Using the Ethernet Card with NetWare13. From the printer object list, select the printer object you want to assign and click OK.14. Go back to th

Using the Ethernet Card with NetWare 4-3116. The Print Queue dialog box appears. Click Assignments. Check if the print server and a printer are assign

4-32 Using the Ethernet Card with NetWareConfiguring the Ethernet card in Remote Printer mode1. From the System Console of the file server where you

Using the Ethernet Card with NetWare 4-33 4. Click the NetWare Basic tab and make the following settings.Frame type: Select one from the following: A

4-34 Using the Ethernet Card with NetWare5. Click the Remote Printer tab and make the following settings.Primary print server name:Select the print se

Using the Ethernet Card with NetWare 4-35Configuring the Ethernet Card for NetWare Using the Ethernet Card Home Page If you have set the IP address fo

viii ContentsAppendix B SpecificationsEnvironmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

4-36 Using the Ethernet Card with NetWareNote:❑ See the EPSON Net!2 setup procedures for Windows for additional cautions and notes.❑ There are some re

Using the Ethernet Card with NetWare 4-37❑ Select Bindery Print Server or Bindery Remote Printer when you are using Bindery mode in NetWare 3.x or Net

4-38 Using the Ethernet Card with NetWare4. The file server list appears.5. Click the file server in which you want to create a queue, and click New.

Using the Ethernet Card with NetWare 4-39Using a print server at a dial-up destination (remote)❏ When the power is turned onThe computer dials out bec

4-40 Using the Ethernet Card with NetWare❏ When the file server on the local network is downNetWare cannot be used on the local network without a file

Using the Ethernet Card with NetWare 4-41❏ During normal operation (standby)Since access is made only to the primary server, the computer does not dia

4-42 Using the Ethernet Card with NetWareChap4.fm Page 42 Friday, August 21, 1998 1:05 PM

Using the Ethernet Card with Macintosh 5-1Chapter 5Using the Ethernet Card with MacintoshThis chapter describes how to configure the Ethernet card for

5-2 Using the Ethernet Card with MacintoshOverall stepsFollow these basic steps to set up and use the Ethernet card with Macintosh systems. Go to the

Using the Ethernet Card with Macintosh 5-3Configuring the Ethernet Card Using EPSON Net!2 for MacintoshUse EPSON Net!2 for Macintosh to configure the

Introduction 1IntroductionYour C82362*, C82363*, or C82364* EPSON Type B Ethernet Interface Card lets you connect your EPSON printer directly to your

5-4 Using the Ethernet Card with Macintosh5. The IP Address Configuration and AppleTalk Configuration dialog box appears.Note:See “Setting the IP addr

Using the Ethernet Card with Macintosh 5-5AppleTalk Setting:Zone Name: Select the network zone in which you want the printer to appear. If the zone ha

5-6 Using the Ethernet Card with MacintoshConfiguring the Ethernet Card for AppleTalk Using the Ethernet Card Home PageYou can configure the Ethernet

Using the Ethernet Card with Macintosh 5-72. Click AppleTalk under Network on the Configuration menu to view the AppleTalk setting screen.3. You can s

5-8 Using the Ethernet Card with Macintosh7. If the message “Configuration change is complete!” appears on your screen, the update is complete. Enable

Using the Ethernet Card with Windows 95 and Windows 98 6-1Chapter 6Using the Ethernet Card with Windows 95 and Windows 98This chapter explains how to

6-2 Using the Ethernet Card with Windows 95 and Windows 98Overall stepsFollow these steps to use the Ethernet card with Windows 95 and Windows 98. Go

Using the Ethernet Card with Windows 95 and Windows 98 6-3Printing with NetBEUI Installing the NetBEUI protocol After installing TCP/IP, you need to i

6-4 Using the Ethernet Card with Windows 95 and Windows 986. In the Select Network Protocol dialog box, select Microsoft from the Manufacturers list,

Using the Ethernet Card with Windows 95 and Windows 98 6-5Note:❑If you have not assigned the IP address on the TCP/IP menu of EPSON Net!2 for Windows,