Epson AcuLaser M7000 Series Betriebsanweisung Seite 1

User’s GuideNPD4502-00 EN

The printer fonts cannot be installed... 162The edges of texts and/or images are not smooth...

5. Place the optional paper cassette units in advance.Epson AcuLaser M7000 Series User's GuideInstalling Options 100

6. Secure the optional paper cassette units with the four fittings. Install two of the four fittings insideon both sides of the optional paper cassett

7. Pull out the standard lower paper cassette.8. Be sure to lift the printer by the correct positions as shown below.cCaution:When moving the printer,

9. Place the printer onto the optional paper cassette units. Align each of the printer’s corners withthose of the optional paper cassette units. Then

10. Open the MP tray.11. Pull out the MP tray from the printer.Epson AcuLaser M7000 Series User's GuideInstalling Options 104

12. Secure the printer to the optional paper cassette unit with the four fittings. Install two of the fourfittings on both sides of the inside of the

13. Insert the MP tray into the printer.14. Close the MP tray.15. Remove the protective materials from the optional paper cassettes.16. Insert all pap

Removing the optional paper cassette unitPerform the installation procedure in reverse.Duplex UnitFor specifications or details about the paper types

Note:Keep the upper option cover, lower option cover, and duplex unit connector cover in a safe place toprevent from losing it.3. Install the Duplex U

5. Reconnect the interface cable and power cord, then turn the printer on.To confirm that the option is installed correctly, print a configuration sta

Imaging Cartridge/Return Imaging Cartridge... 188Appendix B Where To Get HelpContacting Customer Support...

6. Reconnect the interface cable and power cord, then turn the printer on.Memory ModuleBy installing Dual In-line Memory Module (DIMM), you can increa

3. Identify the RAM slot.* RAM slot4. Insert the expansion memory module into the slot to match the notch on the memory module withthat of the slot.No

cCaution:❏ Do not force the memory module into the slot.❏ Be sure to insert the memory module facing the correct way.❏ You should not remove any modul

To confirm that the option is installed correctly, print a configuration status sheet. See “Printing aConfiguration Status Sheet” on page 147.Removing

2. Remove the screws and the Type-B interface card slot cover as shown below.wWarning:Removing screws and covers that are not described in the followi

Removing an interface cardcCaution:Before you remove an interface card, be sure to discharge any static electricity by touching agrounded piece of met

Chapter 5Replacing Consumable ProductsPrecautions During ReplacementAlways observe the following handling precautions when replacing consumable produc

3. Reinstall the imaging cartridge.If the printout is still faded, replace the imaging cartridge.Epson AcuLaser M7000 Series User's GuideRepl

Chapter 6Cleaning and Transporting the PrinterCleaning the PrinterThe printer needs only minimal cleaning. If the printer’s outer case is dirty or dus

Cleaning the pickup rollerMP tray1. Open the MP tray.2. Pull out the MP tray from the printer.Epson AcuLaser M7000 Series User's GuideCleanin

Safety InstructionsWarning, Caution, and NotewWarningmust be followed carefully to avoid bodily injury.cCautionmust be observed to avoid damage to you

3. Gently wipe the rubber parts of the pickup rollers with a well-wrung wet cloth.* pickup roller4. Insert the MP tray into the printer.Epson AcuLaser

5. Close the MP Tray.Lower paper cassette1. Pull out the lower paper cassette.2. Remove the tray cover.Epson AcuLaser M7000 Series User's Gui

3. Gently wipe the rubber parts of the pickup roller with a well-wrung wet cloth.* pickup roller4. Replace the tray cover.5. Insert the lower paper ca

Transporting the PrinterFor long distancesBefore you move the printer, prepare the location where you are going to place it. See the following section

If you are moving the printer on its own, two people should lift and carry the printer.1. Turn off the printer and remove the following items:❏ Power

Chapter 7TroubleshootingClearing Jammed PaperIf paper becomes jammed in the printer, the printer’s LCD panel and EPSON Status Monitor providealert mes

wWarning:❏ Unless specifically instructed in this guide, be careful not to touch the fuser, which is markedCAUTION, or the surrounding areas. If the p

Note:Pull out the MP tray from the printer, and then make sure that there is no jammed paper at the backof the MP tray.3. Open cover A.Epson AcuLaser

4. Hold the handle of the imaging cartridge and pull it out.Note:Place the cartridge on a clean, flat surface.5. If there is any jammed paper, remove

Note:When jammed paper cannot be removed easily, turn the roller to take tension off the paper, then pullit straight out. Turn the roller that is indi

❏ Be sure the AC power cord meets the relevant local safety standards. Use only the power cord thatcomes with this product. Use of the another cord ma

6. Reinstall the imaging cartridge.7. Close cover A.Epson AcuLaser M7000 Series User's GuideTroubleshooting 130

Paper Jam MP B A (MP Tray, Cover B or A)1. Open the MP tray.2. If there is any jammed paper, remove it gently with both hands. Be careful not to tear

Note:Pull out the MP tray from the printer, and then make sure that there is no jammed paper at the backof the MP tray.3. Open cover B.Epson AcuLaser

Note:When the optional Duplex Unit is installed, open the Duplex Unit’s cover before opening cover B.4. Open the paper holder by pulling down the leve

5. If there is any jammed paper, remove it gently while holding the paper holder. Be careful not to tearthe jammed paper.6. Close the paper holder and

7. Open cover A.8. Hold the handle of the imaging cartridge and pull it out.Note:Place the cartridge on a clean, flat surface.Epson AcuLaser M7000 Ser

9. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammedpaper.Note:When jammed paper cannot be removed eas

10. Reinstall the imaging cartridge.11. Close cover A.Epson AcuLaser M7000 Series User's GuideTroubleshooting 137

P a pe r J am M P C 1 A , Pa p er J a m M P C2 A , Paper Jam MP C3 A (MP Tray, All paper cassettes and Cover A)The instruction describes about s

Note:Pull out the MP tray from the printer, and then make sure that there is no jammed paper at the backof the MP tray.3. Pull out the paper cassette

❏ When connecting this product to a computer or other device with a cable, ensure the correctorientation of the connectors. Each connector has only on

5. Gently remove the jammed paper with both hands. Be careful not to tear the jammed paper.6. Open cover A.Epson AcuLaser M7000 Series User's

7. Hold the handle of the imaging cartridge and pull it out.Note:Place the cartridge on a clean, flat surface.8. If there is any jammed paper, remove

Note:When jammed paper cannot be removed easily, turn the roller to take tension off the paper, then pullit straight out. Turn the roller that is indi

10. Pull out the MP tray from the printer.11. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammedpaper.1

13. Close the MP tray.14. Reinsert the paper cassette.Epson AcuLaser M7000 Series User's GuideTroubleshooting 144

15. Reinstall the imaging cartridge.16. Close cover A.Epson AcuLaser M7000 Series User's GuideTroubleshooting 145

Paper Jam DM (Duplex Unit’s cover)1. Press the unlock button to unlock the hooks. Then open the Duplex Unit’s cover.2. Gently remove the jammed paper

3. Close the Duplex Unit’s cover.Printing a Configuration Status SheetTo confirm the current status of the printer, and that the options are installed

Cause What to doThe printer is in the sleep mode (the Wake Up/Sleepbutton lights) or in the power off mode (the Wake Up/Sleep button blinks).Press the

Cause What to doYou may not be using the correct interface cable. If you are using the parallel interface, make sure that the cable is adouble-shielde

To install and use any of the following options, you will need the indicated amount of additionalspace.A 500-Sheet Paper Cassette Unit adds 9.5 cm to

Note:For the additional driver to be installed, please see the table below.Server OS Client OS Additional DriverWindows XP*Windows XP clients Intel Wi

Cause What to doYou may not be using the correct interface cable. If you are using the parallel interface, make sure that the cable is adouble-shielde

Transparencies are output blank from the MP trayRemove the transparencies from the MP tray. Confirm the paper type and size, and then load thecorrect

Print quality or tone is unevenCause What to doYour paper may be moist or damp. Do not store paper in a humid or damp environment.The imaging cartridg

Toner smudgesCause What to doYour paper may be moist or damp. Do not store your paper in a humid or damp environment.You may not be using the correct

Cause What to doThe MP Tray Size setting may be incorrect. When loading paper for which the size is not specified with Autosetting, specify the correc

The non-printed side of the page is dirtyCause What to doToner may have spilled onto the paper feed path. Clean internal printer components by printin

Insufficient memory to print all copiesCause What to doThe printer does not have sufficient memory to collateprint jobs.Reduce the contents of print j

Problems Using OptionsTo confirm your options are installed correctly, print a configuration status sheet. See “Printing aConfiguration Status Sheet”

The optional product is not availableCause What to doThe printer does not recognize the optional product. Print a configuration status sheet to see if

* CAUTION❏ Do not insert your hand deep into the fuser unit as some components are sharp and may causeinjury.❏ Never push objects of any kind through

Checking printer software installationWhen using Windows, you must follow the steps in the Setup Guide packed with the printer to installthe printer s

The printer does not print correctly in the PostScript modeCause What to doThe printer’s emulation mode setting is incorrect. The printer is set to th

The font on the printout is different from that on the screenCause What to doThe PostScript screen fonts are not installed. The PostScript screen font

Cause What to doFor Macintosh users onlyThe print setting in the application is set to binaryencoding.The printer cannot print binary data when it is

Chapter 8About the Printer SoftwareUsing the Printer Software for WindowsUsing the printer driverThe printer driver is the software that allows you to

Windows XP, Server 2003 usersClick Start, click Printers and Faxes. Right-click your printer’s icon, then click PrintingPreferences.Printing a configu

Ordering consumable products and maintenance partsClick the Order Online button on the Basic Settings tab. See “Order Online” on page 172 for details.

❏ If you want to use the printer via the print server, you have to install EPSON Status Monitor fromthe Software Disc with administrator privileges in

Order Online You can order consumable products and maintenance parts online. See “Order Online”on page 172.Tray Icon Settings You can set the informat

b. Toner: Indicates the remaining service life of the imaging cartridge. The toner icon flashes whenthe imaging cartridge has some error or has neared

Handling the consumables❏ Do not burn used consumables because they might explode and injure someone. Dispose of themaccording to local regulations.❏

e. Job Type: Displays the job type. About the Reserve Job function, see “Using the Reserve Job Function”on page 54.f. Cancel Jobbutton:Cancels the se

❏ Note that if the user account used to log on to a client is different from the user account used toconnect to the server, the job management functio

i. More Settings button: Opens the More Settings dialog box in which you can set the URL for placingan order appears.j. Monitor Settings button: Opens

d. Do not display this windowautomatically until a replacementpart becomes low or reaches the endof its service life check box:When this check box is

Computer system requirementsWindows RecommendedOSWindows 7, 7 x64, Vista, Vista x64, XP, XP x64, Server 2008, Server 2008 x64, Server 2003, or Server2

2. If the printer is connected to a USB interface, connect your computer to the printer with a USBcable, then turn on the printer. If the printer is c

❏ Turn off all virus protection programs before installing the printer software.1. Make sure that the printer is turned on. Insert the printer Softwar

Accessing the PostScript printer driverYou can change the PostScript printer driver settings in the PostScript printer driver. To access theprinter dr

In a network environmentFor Mac OS X usersNote:❏ Although EPSON FireWire appears in the interface pop-up list, you cannot use FireWire for printerconn

IP PrintingSelect Epson from the Name List, then select your printer from the Printer Model List.USBSelect your printer from the Name List, then selec

Safety InformationLaser safety labelswWarning:The performance of procedures and adjustments other than those specified in the printer’sdocumentation m

4. Make necessary changes to the settings, then close the dialog box.5. Quit Print & Fax (for Mac OS X 10.5 or later) or Printer Setup Utility (fo

Appendix ATechnical SpecificationsPaperSince the quality of any particular brand or type of paper may be changed by the manufacturer at anytime, Epson

❏ Previously printed paper by any other black-and-white laser printers, color laser printers, colorcopiers, black-and-white copiers, ink jet printers,

Note:The printable area may be smaller depending on the application.PrinterGeneralPrinting method: Laser beam scanning and dry electrophotographic pro

Printer language: ECP/PageESC/P 2 24-pin printer emulation (ESC/P 2 mode)ESC/P 9-pin printer emulation (FX mode)IBM Proprinter emulation (I239X mode)A

Electrical 110-127 V 220-240 VRated voltage 110 V-127 V 220 V-240 VRated frequency 50 Hz-60 Hz 50 Hz-60 HzRated current 11.0 A 5.5 APower consumption

Note:❏ Your computer must support Hi-Speed USB or USB in order to use Hi-Speed USB or USB as theinterface to connect your computer to the printer.❏ Si

Duplex UnitProduct code: C12C802712Paper size: A3, A4, A5, B4, B5, Letter (LT), Half Letter (HLT), Legal (LGL), Government Legal (GLG),Ledger (B), Exe

Imaging Cartridge/Return Imaging CartridgeProduct code/Model: Imaging CartridgeReturn Imaging Cartridge*21221*11222*1Storage temperature: 0 to 35˚C (3

Appendix BWhere To Get HelpContacting Customer SupportBefore Contacting EpsonIf your Epson product is not operating properly and you cannot solve the

❏ Use of multiple laser printers in a confined area❏ Operation in conditions of extremely low humidity❏ Poor room ventilation❏ Long, continuous printi

World Wide Web (http://www.epson.com.sg)Information on product specifications, drivers for download, Frequently Asked Questions (FAQ),Sales Enquiries,

Help for Users in IndonesiaContacts for information, support, and services are:World Wide Web (http://www.epson.co.id)❏ Information on product specifi

Medan Wisma HSBC 4th floorJl. Diponegoro No. 11MedanPhone/Fax: (62) 61-4516173Makassar MTC Karebosi Lt. Ill Kav. P7-8JI. Ahmad Yani No.49MakassarPhone

Help for Users in MalaysiaContacts for information, support, and services are:World Wide Web (http://www.epson.com.my)❏ Information on product specifi

Fax: 30515005Epson India Regional Offices:Location Telephone number Fax numberMumbai 022-28261515 /16/17 022-28257287Delhi 011-30615000 011-30615005Ch

World Wide Web (http://www.epson.com.ph)Information on product specifications, drivers for download, Frequently Asked Questions (FAQ),and E-mail Enqui

IndexAAnti-copy (copy protection) functionhow to use (Windows)...52AUX menu...

Online Help...25Setup Guide...

Paper sourcelower paper cassette...29MP tray...

Tray menu...60Troubleshooting...84, 95 , 125 , 1

Copyright and TrademarksNo part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,mechan

Chapter 1Getting to Know Your PrinterPrinter PartsFront viewa. face-down trayb. control panelc. right side coverd. standard lower paper cassettee. pow

Rear viewa. cover Bb. upper option coverc. AC inletd. lower option covere.Ethernet interface connector*f. Type-B interface card slot coverg. USB inter

Inside the printera. imaging cartridgeb. cover Ac. MP trayd. tray paper size switchControl panelEpson AcuLaser M7000 Series User's GuideGetti

a. LCD panel Displays printer status messages and control panel menu settings.b.Pause/Cancel buttonPress once to pause. Press again to recover from pa

❏ 500-Sheet Paper Cassette Unit (C12C802702)This unit increases paper feeding capacity up to 500 sheets of paper. You can install up to twounits.❏ Dup

Provides you with detailed information on the printer’s functions, optional products, maintenance,troubleshooting, and technical specifications.Networ

Chapter 2Printing TasksLoading Paper into Your PrinterThis section describes how to load paper. If you use special media such as transparencies or env

2. Slide the paper guides to accommodate the paper you are loading.Note:When the loading paper size is bigger than B4, open the extension tray on the

3. Load a stack of the desired paper with the printable surface facing up. Then slide the paper guidesto get a snug fit.Note:Make sure that you do not

4. Turn the tray paper size switch to match the size of the loaded paper.Note:❏ After loading paper, set the MP Type setting on the control panel to m

Albertus, Arial, Coronet, GillSans, Times New Roman and Joanna are trademarks of The Monotype Corporation registered inthe United States Patent and Tr

2. Remove the tray cover.3. Pinch the knobs and slide the paper guides to accommodate the paper you are loading.Note:When loading paper that is A3, B4

4. Slide the unlock levers outward.5. Pull out the paper tray to extend the paper cassette and align the arrow marks according to thepaper size.Epson

6. Slide the unlock levers back to their lock positions.7. Pinch the knobs and slide the paper guide to accommodate the paper you are loading.Epson Ac

8. Load a stack of the desired paper on the center of the paper cassette with the printable surfacefacing up.Note:Make sure that you do not load paper

11. Reinsert the paper cassette into the printer.Note:After loading paper, set the Cassette1 Size and Cassette1 Type settings to match the loadedpaper

Output TrayThe output tray is located on the top of the printer. Since printouts are output face-down, this tray isalso referred to as the facedown tr

❏ Labels that completely cover the backing sheet, with no gaps between the individual labelsMP trayPrinter driver settingsPaper Size A4, LTPaper Sourc

MP traya. C5, IB5b. MON, C10, DL, C6Printer driver settingsPaper Size MON, C10, DL, C5, C6, IB5Paper Source MP TrayNote:❏ Depending on the quality of

Lower paper cassettesPrinter driver settingsPaper Size A4, A3, A5, B4, B5, LT, LGLPaper SourceCassette1, Cassette2*, Cassette3*Paper Type Thick (for 9

Custom paper sizeMP trayPrinter driver settingsPaper SizeUser Defined Size*Paper Source MP TrayPaper Type Normal, Transparency, Labels, Thick, Extra T

Operating System VersionsIn this manual, the following abbreviations are used.Windows refers to Windows 7, 7 x64, Vista, Vista x64, XP, XP x64, Server

Cancelling a Print JobFrom the printerTo cancel a print job on the printer’s control panel, see “Canceling Printing” on page 96.From the computerFor W

Using the Automatic settingFor Windows users1. Click the Basic Settings tab.2. Click Automatic, then choose desired printing quality.3. Click OK.Using

2. Select Advanced. Then select the most appropriate setting from the list according to the type ofdocument or image you want to print.When you choose

Note:❏ You cannot use a predefined setting name for your custom settings.❏ The saved custom settings can only be used with the printer driver you save

3. Select the Toner Save check box, then click OK.Improving text quality in color documentsWhen you print a document in color, text quality can be imp

2. Select the Duplex check box, then select Left, Top, or Right as the binding position.Note:The Duplex check box appears only when the Duplex Unit is

2. Select the Print Layout check box and the number of pages you want to print on one sheet ofpaper.3. If you want to make detailed settings, click Mo

2. Select the Zoom Options check box.3. If you want to resize pages automatically to fit the output paper, select the desired paper size fromthe Outpu

2. Select a watermark that you want to use from the Watermark drop-down list.3. If you want to make detailed settings, click Edit/Delete, and make app

❏ To edit the saved watermark, click Edit/Delete on the Advanced Layout tab, select the watermarkyou want to edit in the Name box, and make appropriat

ContentsSafety InstructionsWarning, Caution, and Note. . . . ... 12Important Safety Instructions

Note:❏ If you select Collate Number, the number of copies is printed.❏ When using the reserve job function, you cannot select Collate Number.4. Click

4. Type the form name in the Form Name box and its description in the Description box.5. Select Foreground Document or Background Document to specify

1. From the Form Selection dialog box, click Save/Delete. To open the dialog box, see “Printing anoverlaid document” on page 51.2. Type the pre-settin

2. Select Copy from the Anti-Copy Pattern drop-down list.3. If you want to make detailed settings, click Edit/Delete, and make appropriate settings. F

Printing Web Pages to Fit Your Paper SizeThis function allows you to make Web pages fit to your paper size when printing. Install EPSONWeb-To-Page fro

Reserve Job Option DescriptionRe-Print Job Lets you print the job now and store it on the printer’s memory. You can print the samejob several times.Ve

Chapter 3Using the Control PanelUsing the Control Panel MenusWhen to make control panel settingsIn general, printer driver settings override settings

Use the u Up and d Down buttons to scroll through available settings, then press the r Rightbutton to select a setting and return to the previous leve

Control Panel MenusNote:Some menus and items appear only when a corresponding optional device is installed or an appropriatesetting has been done.Info

Print Configuration Status SheetPrints a sheet showing the current printer settings and installed options. This sheet can be useful toconfirm whether

Output Tray... 35Selecting and Using Print Media...

Displays the total number of pages printed by the printer.System Information MenuThe following information is displayed.❏ Main Version❏ MCU Version❏ S

Select your paper size from this menu. The tray paper size switch setting is enabled if it is not set to.MP TypeLets you set the paper type loaded in

Printing MenuNote:The settings are overridden by the settings made in the printer driver.Item Settings (default in bold)Page SizeA4, A3, A5, A6, B4, B

Wide A4Selecting On decreases the left and right margins to 3.4 mm.Media TypeSpecifies the paper type.Page SideSelect Front when printing on the front

Adjusts the weight of thin lines so they are printed clearly.Top OffsetMakes fine adjustments to the vertical printing position of the page.cCaution:M

Item Settings (default in bold)Duplex*1 *2Off, OnBinding*1 *2Long Edge, Short EdgeStart Page*1 *2Front, BackSkip Blank Page*3Off, OnAuto Eject Page*4O

This setting determines whether the MP tray has the highest or lowest priority when Auto is selectedas the Paper Source setting in the printer driver.

When you turn this setting on, the printer automatically continues printing after a certain period oftime when one of the following errors occurs: Pap

Confirm Media TypeDisplays a message when the paper type in the tray selected for printing is different from that selectedon Paper type in the printer

Quick Print Job MenuThis menu allows you to print or delete print jobs that were stored in the printer’s memory using theQuick Print Job feature (Re-P

System Information Menu... 60Tray Menu...

Item Settings (default in bold)Parallel I/F*On, OffSpeed*Fast, NormalBi-D*ECP, Off, NibbleBuffer Size*Normal, Maximum, Minimum*After this item is chan

USB MenuItem Settings (default in bold)USB I/F*1On, OffUSB Speed*1 *2HS, FSGet IP Address*2 *3Auto, PING, PanelIP*2 *3 *4 *50.0.0.1 to 255.255.255.254

Buffer SizeDetermines the amount of memory to be used for receiving data and printing data. If Maximum isselected, more memory is allocated for receiv

Item Settings (default in bold)Form5 … 64 … 128LinesCR FunctionCR, CR+LFLF FunctionLF, CR+LFTray Assign4K, 5S, 4*1Available only when downloaded fonts

CR Function, LF FunctionThese functions are included for users of particular operating systems, such as UNIX.Tray AssignChanges the assignment for the

❏ You do not have to select On when using AppleTalk.To use the Binary data, make sure your application supports Binary data and that SEND CTRL-DBefore

Item Settings (default in bold)ZeroChar0, (or the zero character with a slash)FontSelects the font.PitchSelects the pitch (the horizontal spacing) of

Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever theprinting position goes beyond the right margin. If yo

Item Settings (default in bold)Auto CROn, OffAuto LFOff, OnBit ImageDark, Light, BarCodeZeroChar0, (or the zero character with a slash)FontSelects the

Use this option to select one of the thirteen international symbol sets. See the Font Guide for samples ofthe characters in each country’s symbol set.

Removing the Duplex Unit... 109Memory Module...

Item Settings (default in bold)Code Page437, 850, 858, 860, 863, 865T. Margin0.30 ... 0.40 ...1.50inch in 0.05-inch incrementsText1 ... 67 ... 117Line

Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever theprinting position goes beyond the right margin. If th

Password ConfigChanges the password. Enter the old password first and then enter the new password twice.To enter the password, press the d Down or u U

Item Settings (default in bold)Day*4Cancel Selection, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday,Sunday*1Not available in PS3.*2Not availa

When this setting is set to On, the printer enters or recovers from the power off mode at specifiedtimes.StartSpecifies the time when the printer reco

Bookmark RegisteredThe selected menu is registered as a bookmark.Cancel All Print JobThe printer is canceling all print jobs in the printer memory, in

To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to accessthe control panel menus” on page 56 for instructions.

If Off is selected as the Auto Cont setting on the control panel’s Setup Menu, press the Start/Stopbutton to print on the back of the next sheet, or c

You may need to increase the amount of printer memory to be able to print at the desired print qualityfor your document. For more information on addin

Non-Genuine Toner CartridgeThe installed imaging cartridge is not a genuine Epson product. Installing a genuine imaging cartridgeis recommended. The p

Cannot access the shared printer... 149Printout Problems...

The required time to process the print data exceeded the print engine speed because the current page istoo complex. Press the Start/Stop button to res

Reserve Job CanceledThe printer cannot store the data of your print job using the Reserve Job function. The maximumnumber of print jobs stored on the

A controller error or a print engine error has been detected. Turn off the printer. Wait at least 5seconds, then turn it back on. If the error message

Writing ROM PThis message indicates that a ROM module in the slot is being written. Please wait until this messagedisappears.Wrong PasswordNo print jo

3. Use the d Down or u Up button to scroll to the appropriate user name, then press the r Rightbutton.4. Use the d Down or u Up button to scroll to th

To delete the print job, press the d Down or u Up button to display Delete on the LCD panel.7. Press the r Right button to start printing or to delete

Canceling PrintingYou can cancel printing from your computer by using the printer driver.To cancel a print job before it is sent from your computer, s

3. Press the d Down button several times until Reset to display.4. Press the r Right button. Printing is canceled. The printer is ready to receive a n

Chapter 4Installing OptionsOptional Paper Cassette UnitFor details about the paper types and sizes that you can use with the optional paper cassette u

cCaution:Make sure to unplug the power cord from the printer to prevent getting an electrical shock.2. Carefully take the optional paper cassette unit