Epson 600Q Betriebsanweisung PDF herunterladen (Seite 85)

Specifications

A-7

Handshaking: Refer to the IEEE-1284 specification

Signal level: IEEE-1284 Level 1 device

Data transmission timing: Refer to the IEEE-1284 specification

Serial interface The printer’s built-in serial interface is based on the RS-423

standard. This interface has the following characteristics:

Standard: Based on RS-423

Synchronization: Synchronous

Bit rate: Approx. 900 Kbps

Handshaking: X-ON/X-OFF DTR protocol

Word format:

Data bit: 8 bits

Parity bit: None

Start bit: 1 bit

Stop bit: 1 bit

Connector: 8-pin mini-circular connector

Recommended cable: Apple System Peripheral-8 cable (Part

number M0197)

Initialization The printer can be initialized (returned to a fixed set of conditions)

in these ways:

Hardware

initialization

When the printer is turned on, the printer mechanism is initialized,

the input and print buffers are cleared, and all settings return to their

default values. However, the printer mechanism is not initialized if

the printer is turned on within 10 seconds after being turned off. In

this case, the printer caps the print head, and ejects any paper in the

paper path.

Software

initialization

Software initialization clears the print buffer and returns all settings

to their default values, as shown below.

Hardware

initialization

∗

The printer is turned on.

∗

The printer receives an

INIT

signal from the parallel

interface.

Software

initialization

∗

Software sends the ESC @ (initialize the printer) command.

The last panel settings are kept.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson 600Q Betriebsanweisung Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Epson 600Q