Epson Past Ethernet Combo Print Server PS-1216U Bedienungsanleitung

FFaasstt EEtthheerrnneett CCoommbboo PPrriinntt SSeerrvveerr User’s Manual Version: 1.1 (November, 2006)

6 3. The “Print Server Utilities - InstallShield Wizard” is displayed, click "Next". 4. Click “Next” to install the Print Server utilit

7 5. The system starts installing the Print Server Utilities. 6. The utilities are all installed. Please click “Finish” to go to next step.

8 7. The Setup Wizard will be executed, it will guide you to configure the print server and install the printer with the print server to your compu

9 9.

10 Please enter the “Password” of the Print Server you have selected to login the Print Server for more settings. The default “User Name” is “admin”

11 11. Please set the network settings for the Print Server manually. By default, the network settings are as follows. IP Address: 192.168.2.2 Subne

12 Note: The Print Server IP Address must be set to have the same network segment within your network environment or connected computer. If the net

13 The configurations are finished. Please click “Save” to apply new settings and restart the Print Server. 13. The “Install Printer Driver” page

14 4.2.1 GDI/Host-based Printer Following is the installation procedures for “GDI/Host-based Printer” installation. (Printer install example: Canno

15 3. The system starts to connect the printer to print server and automatically search and install the GDI printer’s drivers. 4.

COPYRIGHT Copyright ©2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

16 You will see some prompt messages in the system tray. If there is driver needed you to manually install. In the “Found New Hardware Wizard”, plea

17 6. Select the correct driver and click “Next”. 7. After the driver is installed, click “Finish”.

18 8. After the drivers are installed completely (no more prompt message). Your GDI printer has been bound with the Print Server to your computer.

19 10. Congratulations, the printer is installed successfully. The installed printer will be added to the “Printers & Faxes” in the Windows. If

20 Using GDI Printer After restarting the computer, you will find there are two printer icons added to “Printers and Faxes” in the Windows. The “Pri

21

22 4.3 Print Server Utilities After the installation is completed, there will be four utilities add to “Start/Programs/Print Server Utilities” fold

23 5. Setup Wizard The “Setup Wizard” will guide you to install the Normal printer or GDI printer with the Combo Print Server into your computer. I

24 6. Server Configuration 6.1 Introduction This chapter introduces Combo Print Server’s system configuration utility in Windows environment. This u

25 6.2 Search for All Available Combo Print Server Every time when you run the “Server Manager” configuration utility, click the “Search” icon

FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device ma

26 6.3 Status of Combo Print Server Click “Status” icon on the tool bar, the status of the currently selected Combo Print Server will be showe

27 6.4 Setup the Combo Print Server Click “Setup” icon on the tool bar, the setup items of the current selected Combo Print Server will be sho

28 6.5 General Configuration Double Click “General” icon and the General configuration window will pop-up. You can see basic Combo Print Server in

29 6.6 TCP/IP Configuration Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up. You can configure the Combo Print Server

30 IP Address Assignment: Click the “IP” button to enter the IP setting page. If you need the Combo Print Server to automatically get an IP from D

31 6.7 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you ca

32 7. Web Management 7.1 Introduction Combo Print Server can be configured and managed on the Web. Through Local Area Network, or even Internet, adm

33 7.2 Login You may use any Web Browser to review the status or configure the settings of the Combo Print Server. After entering the IP address of

34 7.3 Device Setup 7.3.1 System This web page will display the information about the Combo Print Server. Device Name: The device name is not co

35 Wireless LAN Status: It will show if the Combo Print Server supports WLAN function. Firmware Version: Display the firmware version of the Combo

Contents 1. Introduction ...1 2. Product Package ...

36 7.3.2 Printer This page lists the information and the status of the printer connected to the Combo Print Server USB port. The printer informat

37 7.3.3 TCP/IP This page lists all TCP/IP settings of the Combo Print Server. Use DHCP/BOOTP: If the Combo Print Server enables to obtain IP Ad

38 7.4 Setup Wizard Note: After you have changed the settings from the Setup Wizard, please click “Save Settings” in the menu of the left side to le

39 7.4.1.1 Advanced Settings Some advanced feature of the Combo Print Server can be set here. TCP/IP Printing (LPR/IPP/RAW): This Combo Print Se

40 7.4.2 TCP/IP You can configure the Combo Print Server to automatically get IP from DHCP server or manually specify static IP. If you need the

41 7.4.3 Save Settings After configuring the Combo Print Server, you have to click the “Save Settings” to save the settings and restart the syste

42 7.5 System Tools 7.5.1 Load Default You can use this page to restore the factory default settings. Click “OK” and after the print server is re

43 7.5.2 Upgrade Firmware from Browser You can upgrade new firmware for this Combo Print Server in this page. Click “Browse” to select the new f

44 8. Troubleshooting 1. The printer cannot be shared in the network.  Check if the printer is a Combo Printer. If it is a Combo printer, please

45 Type ipconfig /all and click enter. z Your PC’s IP address is 192.168.2.111. z The PC’s Subnet Mask is 255.255.255.0. z Your PC’s MAC Addres

1 1. Introduction Thank you for purchasing our Combo Print Server. This Print Server allows your GDI/Host-based printer become a sharable device on

46 Note: Set a static IP Address to Combo Print Server is recommended since DHCP assignment may dramatically change the IP Address for Combo Print S

47 Appendix: Combo Print Server Compatibility List The compatibility information is the first released in May 2007. For the latest information, ple

2 2. Product Package This package contains the following components:  One Combo Print Server  One Power Adapter  One Quick Installation Guide 

3 3. Combo Print Server This Combo Print Server supports GDI Print Server. Users can share GDI printer through the Combo Print Server. GDI print

4 4. Getting Started Before you start, you should have:  One computer with Windows 2000 SP4 above or Windows XP SP1 above  One GDI printer o

5 4.2 Software Installation Procedure Before you start, you should check your computer’s operating system. This program can be run in Windows 2000