Epson TM-U300A Betreibershandbuch PDF herunterladen (Seite 24)

➃ The adjusting screw which holds the roll paper near-end detector, may be

loosened and then set the top of “B” to the adjustment value found in

➂, and

tighten the adjusting screw. (The adjusting screw can be turned with a coin.)

Screw

➄ Be sure that the detecting lever operates smoothly after finishing the adjust-

ment.

NOTES:

l Since the adjustment values in Table 3-1 are calculated from standard

measurements, there may be some variations depending on the model.

If a roll paper with a red end mark at the paper end is used, this mark may

cause the paper to stick together.If this occurs, the dimension A differs from

the table.

Be surethat the detecting lever operates smoothly after finishing the

adjustment.

If the roll paper becomes loose due to poor paper quality, the detector may

operate incorrectly.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Keine Kommentare

Epson TM-U300A Betreibershandbuch Seite 24