Epson 777I Spezifikationen PDF herunterladen (Seite 38)

34

Problems with Paper Feeding

Too many copies are printing.

Make sure that neither the Copies

setting in your printer software, nor the

Copies setting in your application is set

for multiple copies.

Paper doesn’t eject fully or is

wrinkled.

■ If the paper doesn’t eject fully, you

may have set the wrong paper size.

Press the

b maintenance button to

eject the paper. Then select the

correct paper size in your application

or printer software.

■ If it’s wrinkled when it ejects, the

paper may be damp or too thin.

Paper doesn’t feed correctly or jams

in the printer.

■ If paper doesn’t feed, remove it from

the sheet feeder. Then reload it

against the right edge and slide the

left edge guide against the other side.

■ If paper jams, turn off your printer,

open the cover, and remove any

paper that’s inside, including any

small pieces that may have torn off.

Carefully reload paper and press the

b maintenance button.

■ If multiple pages feed at once,

remove the sheet feeder and fan the

edges of the stack to separate the

sheets. Then carefully reload it.

If your paper loads incorrectly or jams

frequently:

■ Use new, smooth, high-quality paper,

loaded printable side up.

■ Don’t load paper above the arrow

mark on the left edge guide.

■ Place the paper against the right edge

and slide the left edge guide against

it, but not too tightly.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare