Epson 600Q Betriebsanweisung PDF herunterladen (Seite 63)

Maintenance and Transportation

5-7

4. Press down the ink cartridge clamp until it locks in place.

5. If you need to replace the other ink cartridge, remove it

as described in “Removing an Empty Ink Cartridge” on

page 5-5. Then follow steps 1 through 4 in this section.

6. Press the

cleaning button and close the printer cover.

The printer moves the print heads and begins charging

the ink delivery system. (Even if you don’t press the

button, ink charging begins 60 seconds after you close

the clamp.)

The

power light flashes and the printer makes various

sounds. Charging takes about two minutes. When it’s

finished, you can print again.

Replacing an Outdated Ink Cartridge

If an ink cartridge is more than six months old, you may need

to replace it. How can you tell? You may notice that your

printouts don’t look as good as they used to. If print quality

doesn’t improve after cleaning and aligning the print heads,

you can replace one or both cartridges.

Caution:

Don’t open the clamp or

remove a cartridge except

to replace it with a new one.

Once you remove a

cartridge, you can’t reuse it,

even if it contains ink.

Caution:

Never turn off the printer

while the

power light is

flashing. However, if the

light is still flashing after 10

minutes and the printer is

not moving or making noise,

you may turn off the printer.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 94 95

Keine Kommentare

Epson 600Q Betriebsanweisung Seite 63