
30
LPC215x, LPC214x
and LPC213x Devices
These powerful yet cost-effective microcontrollers offer USB 2.0
full-speed (12Mbps) capability. Most have up to two 10-bit A/D
converters and a 10-bit D/A converter. In addition to having multiple
interfaces (CAN, I
2
Cs, UARTs, SPIs and SSP), these high-performance
MCUs have up to 512 KB of ISP/IAP Flash and can support an
exteneded temperature range.
The LPC2157/58 is a combination of a high-performance ARM7-based
microcontroller with a flexible LCD driver, making it easy to integrate
advanced technology into everyday applications.
KEY FEATURES
u
60-MHz, 32-bit ARM7TDMI-S with AHB/APB interfaces
u
Up to 512 KB of ISP/IAP Flash
u
Up to 40 KB of SRAM
u
Very fast Flash programming via on-chip boot loader
u
USB 2.0 full-speed (12 Mbps) device (LPC2158)
u
32 segments x 4 backplanes LCD controller
u
Up to two 10-bit A/D converters
* Enhanced features on LPC213x/01 versions
u
10-bit D/A converter
u
Multiple serial interfaces: up to two I
2
Cs, two UARTs, one SPI,
and one SSP
u
Two 32-bit timers
u
Real-time clock and Watchdog timer
u
Up to 47 I/O pins (5-V tolerant)
u
Single 3.3-V supply
u
Temperature Range: -40 to +85°C
u
LQFP64 package (10 x 10 x 1.4 mm)
u
HVQFN64 package (9 x 9 x 0.85 mm)
u
LQFP100 package (14 x 14 x 1.4 mm)
ARM7-based microcontrollers with
LCD driver, USB 2.0, 10-bit ADC,
10-bit DACs and CAN
LPC213x, 214x and 215x block diagram
Up to 512 KB of
128-bit-wide ISP/IAP Flash
E-ICE/RTM interface and
embedded-trace macrocell
Up to 32 KB of SRAM
Vectored
Interrupt Controller
60-MHz, 32-bit ARM7TDMI-S
TM
core
with AHB and APB interfaces
Power management, 3.3-V supply,
real-time clock, Watchdog timer, PLL
32 segments x 4 backplanes LCD
controller (LPC2157 & LPC2158 only)
10-bit D/A converter
(one channel)
Up to two 10-bit A/D converters
(8 channels each)
PWM unit
(six outputs)
Two 32-bit timers
(four capture/ compare
channels each)
Two I
2
C
up to two UARTs SPI, SSP
USB 2.0 FS Device (LPC214x and LPC2158)
up to 47 I/O ports
Kommentare zu diesen Handbüchern