Epson EB-585Wi Betriebsanweisung

BrightLink®575Wi/585Wi/595WiUser's Guide

Supported PC Free File TypesStarting a PC Free Slide ShowStarting a PC Free Movie PresentationPC Free Display OptionsParent topic: Using Basic Project

Parent topic: Projecting a PC Free PresentationStarting a PC Free Slide ShowAfter connecting a USB device or digital camera to the projector, you can

3. Do one of the following:• To display an individual image, press the arrow buttons to highlight the image and press Enter.(Press the Esc button to r

The PC Free screen appears.2. Do the following as necessary to locate your files:• If you need to display files inside a subfolder on your device, pre

PC Free Display OptionsYou can select these display options when using the projector's PC Free feature.Setting Options DescriptionDisplay Order N

Setting Options DescriptionEffect Wipe Transitions between images with a wipe effectDissolve Transitions between images with a dissolveeffectRandom Tr

Adjusting Projector FeaturesFollow the instructions in these sections to use your projector's feature adjustments.Shutting Off the Picture and So

Note: You can also stop video action using the interactive pens.1. Press the Freeze button on the remote control to stop the video action.2. To restar

• Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary.Press and hold the E-Zoom + button to zoom in more quick

Parent topic: Projector Security FeaturesSetting a PasswordTo use password security, you must set a password.1. Hold down the Freeze button on the rem

BrightLink 575Wi/585Wi/595Wi User' s GuideWelcome to the BrightLink 575Wi/585Wi/595Wi User's Guide.11

6. Press Esc to return to the menu.7. Make a note of the password and keep it in a safe place in case you forget it.Parent topic: Password Security Ty

Entering a Password to Use the ProjectorIf a password is set up and a Power On Protection password is enabled, you see a prompt to enter apassword whe

• If you enter an incorrect password several times in succession, the projector displays a requestcode and a message to contact Epson Support. When yo

3. Select the User's Logo setting and press Enter.You see a prompt asking if you want to use the displayed image as a user's logo.4. Select

You see a prompt asking if you want to save the image as the User's Logo.8. Select Yes and press Enter.Note: It takes a few moments for the proje

2. Select the Settings menu and press Enter.3. Select the Control Panel Lock setting and press Enter.4. Select one of these lock types and press Enter

• Use the security cable attachment point on the projector to attach a wire cable and secure it to a roomfixture or heavy furniture.Parent topic: Proj

2. Press the Menu button, select the Settings menu, and press Enter.3. Select the Pattern setting and press Enter.4. Select the User Pattern setting a

Using the Interactive FeaturesFollow the instructions in these sections to use your projector's interactive features.Interactive ModesUsing the I

1. Hover near or tap the board or projected image with the interactive pen or your finger (BrightLink595Wi). Then, tap on the whiteboard icon on the t

Introduction to Your ProjectorRefer to these sections to learn more about your projector and this manual.Projector FeaturesNotations Used in the Docum

4. To show or hide the projection control toolbar, select the arrow.Note: You can also show or hide the projection control toolbar from the projector&

3. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side ofthe screen.Note: You can use the pen or your finger

3. Press the Menu button on the remote control, select the Extended menu, and press the Enterbutton.4. Select the USB Type B setting and press the Ent

6. Select the Easy Interactive Function setting and press the Enter button.7. Select one of the following as the Pen Operation Mode depending on the o

PC Interactive Mode System RequirementsYour computer system must meet the system requirements here to use PC Interactive mode and EasyInteractive Tool

Using the PensYour projector came with a blue pen and an orange pen, identified by the color on the end of the pen.You can use either pen, or both pen

• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover theblack section near the tip of the pen.• To write or d

• To use the pen as a mouse in PC Interactive mode, do the following:• To left-click, tap the board with the pen tip.• To double-click, tap twice.• To

• Using the Image Shift feature• Moving the projectorNote: Move any pen you are not using away from the projection screen while calibrating.Calibratin

2. Select the Easy Interactive Function setting and press Enter.3. Select Auto Calibration and press Enter.4. Adjust the image focus, if necessary.5.

• Native resolution of 1280 × 800 pixels (WXGA)Flexible connectivity• HDMI 1/MHL and HDMI 2 ports for computer or video device connection• Plug-and-pl

The cursor location and pen position should match after calibration. If not, you may need to calibratemanually.Parent topic: Pen CalibrationRelated ta

2. Select the Easy Interactive Function setting and press Enter.3. Select Manual Calibration and press Enter.4. Adjust the image focus, if necessary.5

The circle disappears, and you see another circle below the first one.132

Note: For the most accurate calibration, make sure you touch the center of the circle.7. Touch the center of the next circle, then repeat. When you ge

Related tasksFocusing the ImageCalibrating AutomaticallyUsing Finger Touch InteractivityYou can use your finger to perform the same functions as the i

Follow these precautions when using the Touch Unit and finger touch interactivity:• Children using finger touch interactivity should always be accompa

Parent topic: Using Finger Touch InteractivityCalibrating for Finger Touch InteractivityFinger touch calibration coordinates the positioning of your f

2. Select the Easy Interactive Function setting and press Enter.3. Select Touch Unit Setup and press Enter.137

4. Select Touch Calibration and press Enter.The following screen appears:5. Adjust the image focus, if necessary.6. Press Enter to select Yes.A flashi

7. Touch and hold the center of the circle with your finger until the circle disappears and another circleappears, then release it.The circle disappea

Product Box ContentsSave all the packaging in case you need to ship the projector. Always use the original packaging (orequivalent) when shipping.Make

When you get to the bottom of a column, the next circle appears at the top of a new column.Note: If you make a mistake, press the Esc button on the re

4. Calibrate for finger touch interactivity.5. Turn on your projector. This automatically turns on the Touch Unit also.The blue light on the Touch Uni

7. To use your finger as a mouse in PC Interactive mode, do the following:• To left-click, tap the board with your finger.• To double-click, tap twice

Using BrightLink With a ComputerYou can connect a computer to the projector and install the software from the CD labeled "EpsonProjector Software

2. Press the Menu button, select the Extended menu, and press Enter.3. Select the Easy Interactive Function setting and press Enter.144

4. Set the Pen Mode setting to PC Interactive.5. Select Advanced in the PC Interactive section and press Enter.145

6. Select Manual Adj. Pen Area and press Enter.You see this screen:7. Press Enter to select Yes.The mouse pointer moves toward the top left corner.8.

Parent topic: Using BrightLink With a ComputerWindows Pen Input and Ink ToolsIf you are using Windows 8.x, Windows 7, or Windows Vista, you can use th

2. Select the Easy Interactive Function setting and press Enter.3. Select Pen Operation Mode and press Enter.4. Select one of the following:• One User

• Mode 2 when using pen input (BrightLink 595Wi)Parent topic: Windows Pen Input and Ink ToolsUsing Windows Pen Input and Ink ToolsIf you are using Win

3 Remote control batteries (two AA alkaline)4 Pens and batteries (one AA alkaline battery for each pen)5 Battery charger with 2 AA rechargeable batter

• To annotate your PowerPoint slides in Slideshow mode, press the button on the side of the interactivepen or press the projection surface with your f

Note: The toolbar arrows disappear if they are not used. To make them reappear, tap the projectionsurface with the pen or your finger (BrightLink 595W

In the following illustration, the annotation mode tools are shown on the left, and the whiteboardannotation mode tools on the right:Switch to annotat

Change highlighter pen colorWrite or draw free-form lines with transparent highlighter penBlack pen (fine point on left, thick on right)Red pen (fine

3. Do one of the following to write or draw on the background.• To erase, select the Eraser tool.• To clear the whole screen, select the Clear all too

Turn off the projectorChange the image source using a displayed list.(To close the image source list, select the arrow icon at the bottom of the list.

Controlling the Volume with the Volume ButtonsStarting a PC Free Movie PresentationResizing the Image with the Wide and Tele ButtonsSelecting an Image

3. Select the user name for the device from which you want to project.4. Select Return.You see the selected user's screen image.Parent topic: Pro

Adjusting the Menu SettingsFollow the instructions in these sections to access the projector menu system and change projectorsettings.Using the Projec

You see the menu screen displaying the Image menu settings.2. Press the up or down arrow buttons to move through the menus listed on the left. The set

• To receive an HDMI signal, you need a compatible HDMI cable. You can purchase one from Epson oran authorized Epson reseller.Note: To connect a Mac t

Image Quality Settings - Image MenuSettings on the Image menu let you adjust the quality of your image for the input source you are currentlyusing. Th

Setting Options DescriptionColor Temp. (color temperature) Varying levels available Sets the overall color tone. Lowervalues tint the image red, andhi

Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing theAuto button on the remote control.To change set

Setting Options DescriptionHDMI Video Range Auto Sets the video range to match thesetting of the device connected toNormalthe HDMI input portExpandedA

Setting Options DescriptionOverscan Auto Changes the projected imageratio to make the edges visible byOffa selectable percentage or4%automatically8%Im

Setting Options DescriptionKeystone H/V Keystone Adjusts image shape torectangular (horizontally andQuick Cornervertically)H/V Keystone: lets you manu

Setting Options DescriptionUser Button Power Consumption Assigns a menu option to theUser button on the remoteInfocontrol for one-touch accessProgress

Projector Setup Settings - Extended MenuSettings on the Extended menu let you customize various projector setup features that control itsoperation.Eas

Setting Options DescriptionTouch Unit Setup Installation Pattern Selects settings for the Touchunit(BrightLink 595Wi) PowerInstallation Pattern: displ

Setting Options DescriptionAdvanced Distance of Projectors Selects various settings forinteractive featuresSync of ProjectorsDistance of Projectors, S

Option or part Part numberTable projection mount (ELPMB29) V12H516020Epson DC-06 document camera (ELPDC06) V12H321005Epson DC-11 document camera (ELPD

Setting Options DescriptionAdvanced Pen Tip Button Let you select pen operation andadjustment optionsAuto Adjust Pen AreaPen Tip Button: assign either

Setting Options DescriptionDisplay Messages Selects various display optionsDisplay Background Messages: controls whethermessages are displayed on theS

Setting Options DescriptionProjection Front Selects the way the projectorfaces the screen so the image isFront/Upside Downoriented correctlyRearRear U

Setting Options DescriptionA/V Settings A/V Output Selects the following when theprojector is in standby modeAudio Output(turned off):HDMI1 Audio Outp

Setting Options DescriptionUSB Type B Easy Interactive Function Selects what happens when youconnect your computer to theUSB Display/Easy Interactivep

Projector Network Settings - Network MenuSettings on the Network menu let you view network information and set up the projector for monitoringand cont

Setting Options DescriptionNet. Info - Wired LAN Projector Name Displays wired network statusand detailsDHCPIP AddressSubnet MaskGateway AddressMAC Ad

Setting Options DescriptionPower Consumption Normal Selects the brightness mode ofthe projector lampECONormal: sets maximum lampbrightnessECO: reduces

Setting Options DescriptionECO Display On Displays a leaf icon in the bottomleft corner of the projected screenOffto indicate the power-savingstatus w

Information item DescriptionSource Displays the name of the port to which the current input source isconnectedInput Signal Displays the input signal s

Warranty and Registration InformationYour projector comes with a basic warranty that lets you project with confidence. For details, see thewarranty th

Event ID code Cause and solution0434 Unstable network communication. Check the network communication status, wait afew moments, and try connecting to

You can also reset the projector's lamp usage timer to zero when you replace the lamp using the ResetLamp Hours option.You cannot reset the follo

Maintaining and Transporting the ProjectorFollow the instructions in these sections to maintain your projector and transport it from place to place.Pr

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe theprojection window.Warning: Do not use a lens cleane

Cleaning the Projector CaseBefore cleaning the projector case, turn off the projector and unplug the power cord.• To remove dust or dirt, use a soft,

2. Slide the air filter cover latch and open the air filter cover.185

3. Pull the air filter out of the projector.4. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.Note: If dust

5. Place the air filter back in the projector as shown.187

6. Close the air filter cover and slide the latch.Parent topic: Air Filter and Vent Maintenance188

Replacing the Air FilterYou need to replace the air filter in the following situations:• After cleaning the air filter, you see a message telling you

Parent topic: Introduction to Your ProjectorRelated referencesWhere to Get HelpProjector Part LocationsCheck the projector part illustrations to learn

2. Slide the air filter cover latch and open the air filter cover.190

3. Pull the air filter out of the projector.Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.191

4. Place the new air filter in the projector as shown.192

5. Close the air filter cover and slide the latch.Parent topic: Air Filter and Vent Maintenance193

Projector Lamp MaintenanceThe projector keeps track of the number of hours the lamp is used and displays this information in theprojector's menu

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lampcover.4. Slide off the lamp cover.195

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.6. Lift up the lamp handle and gently pull the lamp ou

7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure itis facing the right way. Press the handl

9. Replace the lamp cover and tighten the screw to secure it.Note: Be sure the lamp cover is securely installed or the lamp will not come on.Reset the

3. Select the Reset menu and press Enter.4. Select Reset Lamp Hours and press Enter.You see a prompt asking if you want to reset the lamp hours.5. Sel

4 Cable cover screws5 Cable cover6 Exhaust vent7 Lamp cover screw8 Lamp coverParent topic: Projector Part LocationsProjector Parts - Side1 Filter cove

1. Open the battery cover as shown.2. Remove the old batteries.Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid gett

4. Close the battery cover and press it down until it clicks into place.Warning: Dispose of used batteries according to local regulations. Do not expo

2. Remove the old battery.Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid onyour hands. If it get

1. Twist off the tip of the pen to remove it.2. Twist on the new tip.Parent topic: Projector MaintenanceTransporting the ProjectorThe projector contai

Solving ProblemsCheck the solutions in these sections if you have any problems using the projector.Projection Problem TipsProjector Light StatusUsing

Projector Light StatusThe lights on the projector indicate the projector status and let you know when a problem occurs. Checkthe status and color of t

Power light Status light Lamp light Temp light Status and solutionBlue Flashing blue Off Off Shutting down. (When the Status lightstops flashing, you

Power light Status light Lamp light Temp light Status and solutionOff Flashing blue Orange Off Lamp has a problem.• Check to see if the lamp is burned

Projector Setup Settings - Extended MenuWhere to Get HelpRelated tasksCleaning the Air Filter and VentsReplacing the Air FilterReplacing the LampUsing

Solutions to Microphone ProblemsParent topic: Solving ProblemsSolutions When No Image AppearsIf no image appears, try the following solutions:• Press

3 Wireless LAN light4 Interactive pen receiver5 Obstacle sensor6 Remote receiver7 Projection window8 Security lock port9 Air filter cover10 Air intake

Solutions When Image is Incorrect Using the USB Display FunctionIf no image appears or if the image appears incorrectly using the USB Display function

1. Hold down the laptop's Fn key and press the key labelled with a monitor icon or CRT/LCD. (Seeyour laptop manual for details.) Wait a few secon

• Press the Aspect button on the remote control to select a different image aspect ratio.• If you zoomed into or out of the image using the E-Zoom but

Solutions When the Image Contains Noise or StaticIf the projected image seems to contain electronic interference (noise) or static, try the followings

Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let theprojector warm up to room temperature before u

Image Quality Settings - Image MenuSolutions to Sound ProblemsIf there is no sound when you expect it or the volume is too low or high, try the follow

Parent topic: Solving Image or Sound ProblemsRelated referencesProjector Setup Settings - Extended MenuProjector Feature Settings - Settings MenuRelat

Related tasksUnlocking the Projector's ButtonsSolutions to Problems with the Remote ControlIf the projector does not respond to remote control co

Solving Interactive ProblemsCheck the solutions in these sections if you have problems using the interactive system.Solutions When "Hardware Devi

Related referencesWhere to Get HelpSolutions When the Interactive Pens Do Not WorkIf the interactive pens do not work, try the following solutions:• T

7 Monitor Out/Computer2 port8 HDMI 2 port9 S-Video port10 HDMI 1/MHL port11 Audio port12 Video port13 SYNC In/Out ports14 Power inlet15 TCH port for t

Solutions When Finger Touch Interactivity Does Not WorkIf finger touch interactivity does not work (BrightLink 595Wi), try the following solutions:• M

• Press the Pen Mode button on the remote control to toggle between PC Interactive and PC FreeAnnotation modes.Parent topic: Solving Interactive Probl

Solutions When the Interactive Pens Cause Interference or Unwanted EffectsIf the pens are causing interference or unwanted effects, try the following

Speak to a Support RepresentativeTo use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for theduration of your

Technical SpecificationsThese sections list the technical specifications of your projector.General Projector SpecificationsProjector Lamp Specificatio

BrightLink 585Wi/595Wi:Normal Power Consumption mode:White light output 3300 lumens (ISO 21118 standard)Color light output 3300 lumensECO Power Consum

Projector Lamp SpecificationsType UHE (Ultra High Efficiency)Power consumption BrightLink 575Wi:215 WBrightLink 585Wi/595Wi:245 WLamp life BrightLink

Remote Control SpecificationsReception range 19.7 feet (6 m)Batteries Two alkaline or manganese AAParent topic: Technical SpecificationsTouch Unit Spe

Power consumption BrightLink 575Wi:(110 to 120 V) Operating:Normal Power Consumption mode: 333 WECO Power Consumption mode: 239 WStandby:0.33 W (Commu

Projector Environmental SpecificationsTemperature Operating: 41 to 95 °F (5 to 35 °C)Storage: 14 to 140 °F (–10 to 60 °C)Humidity (relative, non- Oper

Projector Parts - Base1 Ceiling mount holes (5)2 Security cable attachment point3 Wall mount plate holes (4)4 Illumination sensorParent topic: Project

Display format Refresh rate (in Hz) Resolution (in pixels)XGA 60/72/75/85 1024 × 768WXGA 60 1280 × 76860 1366 × 76860/75/85 1280 × 800WXGA+ 60/75/85 1

Display format Refresh rate (in Hz) Resolution (in pixels)HDTV (720p) 50/60 1280 × 720HDTV (1080i) 50/60 1920 × 1080HDMI input signalsVGA 60 640 × 480

Display format Refresh rate (in Hz) Resolution (in pixels)HDTV (1080p) 24/30 1920 × 1080* Wide resolution onlyParent topic: Technical SpecificationsUS

NoticesCheck these sections for important notices about your projector.RecyclingImportant Safety InformationImportant Safety InstructionsFCC Complianc

Important Safety InstructionsFollow these safety instructions when setting up and using the projector:• Do not look into the lens when the projector i

setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall andthe air exhaust vent.• Do not operate the project

• Do not use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 ° C) at analtitude of 7500 feet (2286 m) or less, or 41 t

Parent topic: NoticesRestriction of UseWhen this product is used for applications requiring high reliability/safety such as transportation devicesrela

For Canadian UsersCAN ICES-3(B)/NMB-3(B)Parent topic: NoticesWireless Telegraphy Act RegulationsThe following acts are prohibited by the Wireless Tele

We provide the source code of the GPL Programs until five (5) years after the discontinuation of samemodel of this projector product.If you desire to

Projector Parts - Control Panel1 Projector status lights2 Source Search button (searches for connected video sources)3 Enter button (selects options)4

using it. (Some other Free Software Foundation software is covered by the GNU Lesser General PublicLicense instead.) You can apply it to your programs

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in anymedium, provided that you conspicuously and

a) Accompany it with the complete corresponding machine-readable source code, which must bedistributed under the terms of Sections 1 and 2 above on a

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason(not limited to patent issues), conditions are

NO WARRANTY11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FORTHE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT

Also add information on how to contact you by electronic and paper mail.If the program is interactive, make it output a short notice like this when it

SDL-ImageThe GNU Lesser General Public License Version 2 is as follows. You also can see the GNU LesserGeneral Public License Version 2 at http://www.

To protect each distributor, we want to make it very clear that there is no warranty for the free library.Also, if the library is modified by someone

GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING,DISTRIBUTION AND MODIFICATION0. This License Agreement applies to any software libr

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an applicationprogram that uses the facility, other

Projector Parts - Interactive Pens and Pen Tray1 Pen tip2 Battery light3 Power/function button4 Attachment for optional strap or cord5 Battery cover25

5. A program that contains no derivative of any portion of the Library, but is designed to work with theLibrary by being compiled or linked with it, i

library, if the user installs one, as long as the modified version is interface-compatible with the versionthat the work was made with.c) Accompany th

10. Each time you redistribute the Library (or any work based on the Library), the recipient automaticallyreceives a license from the original licenso

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditionsare incompatible with these, write to the au

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without eventhe implied warranty of MERCHANTABILITY or FITNE

3. Neither the name of the University nor the names of its contributors may be used to endorse orpromote products derived from this software without s

In legalese:The authors make NO WARRANTY or representation, either express or implied, with respect to thissoftware, its quality, accuracy, merchantab

(Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode, it is unlikelythat very many implementations will support it.

Simon-Pierre CadieuxEric S. RaymondGilles Vollantand with the following additions to the disclaimer:There is no warranty against interference with you

Tim WegnerThe PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim allwarranties, expressed or im

1 Installation magnets2 Mounting holes3 Security lock holeParent topic: Projector Part Locations26

License terms of conditions of each program which are provided by owner of the copyright to the "zlib"are as follows.Copyright notice:(C) 19

http://www.apache.org/licenses/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions."License" shall mean the terms and

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contributionhas been received by Licensor and subse

Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwisecomplies with the conditions stated in this Licens

that a file or class name and description of purpose be included on the same "printed page" as thecopyright notice for easier identification

1. source code distributions include the above copyright notice, this list of conditions and the followingdisclaimer;2. binary distributions include t

*Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation an

documentation, and that the name of Lucent or any of its entities not be used in advertising or publicitypertaining to distribution of the software wi

This software may be used freely so long as this copyright notice is left intact. There is no warrantee onthis software.(7) Sun MicrosystemsCopyright

THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIEDWARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

Projector Parts - Remote Control1 Power button2 Computer button (cycles through connected computer sources)27

1. Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.2. Redistributions in bi

Copyright (C) 1997 by Andrey A. Chernov, Moscow, Russia.All rights reserved.Redistribution and use in source and binary forms, with or without modific

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.(17) S. L. MoshierAuthor

Redistribution and use in source and binary forms, with or without modification, are permitted providedthat the following conditions are met:1. Redist

Intel Corporation provides this AS IS, WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED,INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITN

1. Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.2. Redistributions in bi

at Electronni Visti IA, Kiev, Ukraine.All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitt

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.(32) - Andrey A. Chernov

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.*Redistributions in binary

3 Video button (cycles through connected video sources)4 Numeric buttons (enter numbers)5 Auto button (automatically adjusts position, tracking, and s

Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.**Redistributions in binary

License terms of conditions of each program which are provided by owner of the copyright to the "MITLicense" are as follows.Copyright (c) 20

The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or theconditions described in Version 2 of the GNU Pub

License terms of conditions of each program which are provided by owner of the copyright to the " TINET" are as follows.(1) FreeBSDCopyright

The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or theconditions described in Version 2 of the GNU Pub

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of anyoptions or any consumable products other than those

Front (Cover On)Front (Cover Off)1 Dial cover2 TCH port3 Security slot4 Adjustment dials5 Power light29

ContentsBrightLink 575Wi/585Wi/595Wi User's Guide ... 11Int

Rear1 Laser diffusion ports2 Installation magnets3 Guide markers (used for performing angle adjustment)Parent topic: Projector Part Locations30

Setting Up the ProjectorFollow the instructions in these sections to set up your projector for use.Projector PlacementRemoving and Attaching the Cable

Mounted on the wall or ceilingMounted vertically on a table to create an interactive workspaceWherever you set up the projector, make sure to position

16:10 Aspect RatioDiagonal Min. Image width Image height Min. projection Distance from topimage recommended distance of image to wallsize ceiling heig

Diagonal Min. Image width Image height Min. projection Distance from topimage recommende distance of image to wallsize d ceiling plateheight90 inches

2. Slide off the cable cover.To attach the cable cover, slide it into position and tighten the screws.Parent topic: Setting Up the ProjectorProjector

• For slide shows without a computer, you can connect USB devices (such as a flash drive or camera)or an optional Epson document camera.Caution: If yo

USB Display will slow interactive pen function. For the best performance, VGA or HDMI connections arerecommended.1. Turn on your computer.2. Connect t

Connecting to a Computer for VGA VideoYou can connect the projector to your computer using a VGA computer cable.Note: To connect a Mac that includes o

1. Connect the HDMI cable to your computer's HDMI output port.2. Connect the other end to one of the projector's HDMI ports.Note: The projec

Connecting to Video Sources ... 40Connecting to a

If you want to use the remote control as a wireless mouse, you need to change the USB Type B settingin the projector's Extended menu. You may als

Connecting to a Composite Video SourceConnecting to an S-Video Video SourceConnecting to a Video Source for SoundParent topic: Projector ConnectionsCo

3. Connect the other end of the cable to the projector's HDMI 1/MHL port.Note: The projector converts the digital audio signal sent from your vid

Note: If you choose the Computer2 port, you may need to change the Monitor Out Port setting inthe projector's Extended menu.3. Tighten the screws

2. Connect the other end to the projector's S-Video port.Parent topic: Connecting to Video SourcesConnecting to a Video Source for SoundYou can p

Connecting to an External Computer MonitorIf you connected the projector to a computer using a Computer port, you can also connect an externalmonitor

Connecting to External SpeakersTo enhance the sound from your presentation, you can connect the projector to external self-poweredspeakers. You can co

Note: If you want to output audio from the microphone when the projector is turned off, you need toselect Communication On for the Standby Mode settin

• USB hard drive• Multimedia storage viewer• USB memory card readerNote: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-complia

Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may notoperate correctly.3. Connect the other end of the cable

Network Projector E-mail Alert Messages ... 70Setting Up Monitoring

• For the Epson DC-20 document camera, connect it to the projector's HDMI, Computer, or Video portand to the corresponding port on the document c

1. Connect one end of the remote control cable to the SYNC In port on one projector, and connect theother end to the SYNC Out port on the other projec

Installing Batteries in the Remote ControlThe remote control uses the two AA batteries that came with the projector.Caution: Use only the type of batt

3. Close the battery cover and press it down until it clicks into place.Warning: Dispose of used batteries according to local regulations. Do not expo

2. Insert the battery with the + and – ends facing as shown.3. Replace the battery cover and press it down until it clicks into place.Parent topic: Se

Using the Projector on a NetworkFollow the instructions in these sections to set up your projector for use on a network.Note: To use the interactive p

Note: If your projector is connected via a LAN cable to a network that includes a wireless access point,you can connect to the projector wirelessly th

1. Turn on the projector.2. Press the Menu button.3. Select the Network menu and press Enter.4. Select Network Configuration and press Enter.5. Select

6. Select the following basic options as necessary:• Projector Name lets you enter a name up to 16 alphanumeric characters long to identify theproject

• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, SubnetMask, and Gateway Address as needed.Note: To high

Starting a PC Free Slide Show ... 101Starting a PC Fr

• Projection from iOS or Android devices with the wireless LAN module and free Epson iProjection app;visit epson.com/projectorapp (U.S.) or epson.ca/p

2. Unscrew and remove the cable cover if it is attached (screwdriver not included).3. Insert the wireless LAN module into the port shown here.61

4. Replace the cable cover and tighten the screws.5. Plug in and turn on the projector.Parent topic: Wireless Network ProjectionUsing Quick Wireless C

After a few minutes, your computer image is displayed by the projector. If it does not appear, pressthe LAN button on your projector remote control or

5. Select the Basic menu and press Enter.6. Select the following basic options as necessary:• Projector Name lets you enter a name up to 16 alphanumer

7. Select the Wireless LAN menu and press Enter.8. Select the settings on the Wireless LAN menu as necessary for your network.9. When you finish selec

Setting Options DescriptionConnection Mode Quick Selects the type of wirelessconnection:AdvancedQuick: lets you quickly connectto one computer or use

Selecting Wireless Network Settings in WindowsBefore connecting to the projector, select the correct wireless network on your computer.1. To access yo

4. Select the Security menu and press Enter.5. Select the security settings as necessary to match your network settings.6. When you finish selecting s

Setting Up Projector Network E-Mail AlertsYou can set up the projector to send you an e-mail alert over the network if there is a problem with theproj

Adjusting the Pen Operation Area ... 143Easy Interactive T

9. When you finish selecting settings, select Complete and follow the on-screen instructions to saveyour settings and exit the menus.Note: If a critic

4. Select the Others menu and press Enter.5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.Note: D

Controlling a Networked Projector Using a Web BrowserOnce you have connected your projector to your network, you can select projector settings and con

You see a screen like this:1 Power button control2 Selects Computer port source3 Selects Video, S-Video, and HDMI port sources4 Freeze button control5

Related referencesProjector Setup Settings - Extended MenuCrestron RoomView SupportIf you are using the Crestron RoomView network monitoring and contr

4. Select the Others menu and press Enter.5. Set the Crestron RoomView setting to On to allow the projector to be detected.Note: Enabling Crestron Roo

You see this screen:3. Select the input source that you want to control in the Sources List box. You can scroll throughavailable sources using the up

Using Basic Projector FeaturesFollow the instructions in these sections to use your projector's basic features.Turning On the ProjectorTurning Of

1. Connect the power cord to the projector's power inlet.2. Plug the power cord into an electrical outlet.Note: With Direct Power On turned on, t

If you do not see a projected image right away, try the following:• Turn on the connected computer or video device.• Press the Source Search button on

Resetting the Lamp Timer... 198Replacing the Remot

3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.Caution: To avoid damaging the projector or lamp

3. Select the Extended menu and press Enter.4. Select the Language setting and press Enter.5. Select the language you want to use and press Enter.6. P

Note: For interactive use, make sure the degree of horizontal and vertical keystone correction is no morethan ± 3°.1. Turn on the projector and displa

3. Press a keystone button on the projector's control panel to adjust the image shape.Note: The horizontal keystone adjustment buttons are labele

Related referencesProjector Feature Settings - Settings MenuCorrecting Image Shape with Quick CornerYou can use the projector's Quick Corner sett

You see the Quick Corner adjustment screen:6. Use the arrow buttons on the projector or the remote control to select the corner of the image youwant t

After you adjust the image size, the Image Shift screen is displayed automatically for adjusting theimage position.Note: If the projector is installed

After you adjust the image size, the Image Shift screen is displayed automatically.3. Use the arrow buttons on the projector or remote control to adju

3. Raise or lower the focus lever to sharpen the image.Parent topic: Using Basic Projector FeaturesRelated referencesProjector Feature Settings - Sett

Make sure that you aim the remote control at the projector's receivers within the angles listed here.1 19.7 feet (6 m)2 ± 30°3 ± 55°4 60°5 75°6 1

Solutions When the Built-In Toolbar (PC Free Annotation) Does Not Work... 220Solutions When the Interactive Pen Position

Using the Remote Control as a Wireless MouseYou can use the projector's remote control as a wireless mouse so you can control projection at adist

Related tasksConnecting to a Computer for Pen Use or USB Mouse ControlUsing the Remote Control as a PointerYou can use the projector's remote con

1. Make sure the connected image source you want to use is turned on.2. For video image sources, insert a DVD or other video media and press its play

3 USB port sources (computer display and external devices)4 Network source (LAN)Parent topic: Using Basic Projector FeaturesProjection ModesDepending

2. Hold down the A/V Mute button on the remote control for five seconds.The image disappears briefly and reappears flipped top-to-bottom.3. To change

4. Select the Projection setting and press Enter.5. Select a projection mode and press Enter.6. Press Menu or Esc to exit the menus.Parent topic: Proj

3. To cycle through the available aspect ratios for your input signal, press the Aspect buttonrepeatedly.Parent topic: Image Aspect RatioAvailable Ima

Available Color ModesTurning On Auto IrisParent topic: Using Basic Projector FeaturesRelated referencesImage Quality Settings - Image MenuChanging the

Color Mode DescriptionTheatre Best for movies projected in a dark roomSports Best for television images in a bright roomPhoto Best for still images pr

4. Select the Auto Iris setting and select On.Note: You can turn Auto Iris on or off for each Color Mode that supports the feature. You cannotchange t