Epson EB-460I Installationsanleitung

Installation Guide

105. Installation ProcedureMake sure to follow the steps below to install the mounting bracket. If you ignore these steps, the mounting bracket could

11English(3) Make mounting holes in the wall in the required locations.The wall plate needs to be secured by commercially available anchors or lag bol

12C Attach the mounting bracket to the wall plate(1) Hang the mounting bracket hook onto the wall plate bar (A).(2) Lift up the mounting bracket and p

13English(2) Insert the slide plate into the mounting bracket from the interface side of the projector (A).Align the marks on the projector and the mo

146. Adjusting the Projection ScreenTo ensure maximum projection screen quality, follow the steps below to adjust the projection screen. A Turn on the

15EnglishD Adjust the focus(1) Move the air filter cover lever to open the air filter cover.(2) Use the focus lever to adjust the focus.(3) After you

16F Use the right adjustment dial to adjust the horizontal rotation(1) Loosen the two screws that correspond to the right adjustment dial (A).(2) Turn

17EnglishH Adjust the vertical slideAdjust the vertical slide with the two M8 x 35 mm hexagon socket head cap bolts at the bottom of the mounting brac

187. Attaching the CoversA Attach the wall plate cover and end cap(1) Secure the wall plate cover with the two M4 x 12 mm hexagon socket head cap bolt

19English8. AppendixUsing the Easy Interactive FunctionAfter you install an Easy Interactive Function compatible model (EB-460i/450Wi), you need to in

2Safety InstructionsFor your safety, read all the instructions in this guide before using the mounting bracket. Incorrect handling that ignores instru

20

21English

3EnglishPlace to Install the Mounting Bracket Carry out the power supply wiring work for the installation location of the mounting bracket in advance

41 Package Contentss Page 52 Specificationss Page 63 Connecting Devicess Page 74 Projection Distance Tables Page 85 Installation Procedures Page 10(1)

5English1. Package Contents Use the bolts supplied with the mounting bracket to install it, as directed in this guide. Do not substitute these bolts

62. SpecificationsWall plateMounting bracket adjustment rangeItem Specification Remark Reference PageMounting bracket mass Approx. 6.3 kg (13.89 lb.)

7English3.Connecting DevicesPrepare a power cable, computer cable, USB cable, and so on at the location where the mounting bracket is to be installed.

84. Projection Distance TableRefer to the table below and install the mounting bracket and projector to project images at an appropriate size on the p

9EnglishUnit: mm (in.)Aspect RatioS a b hInteractiveWhiteboardScreenSizeProjection DistanceMinimum (Wide)Distance Between Projection Surface and Wall