Epson AcuLaser C9300 Bedienungsanleitung PDF herunterladen (Seite 21)

EpsonNet Config’s setting screens Necessary components

TCP/IP, AppleTalk, IPP, SNMP (IP trap) Internet Protocol (TCP/IP)

The following table lists the components required for network printing.

Printing method Necessary components

LPR or Internet printing Internet Protocol (TCP/IP)

4. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to

open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask,

etc. and then click OK.

5. Restart the computer.

The necessary components are now installed. Go to the section “Setting Up the Network Interface” on

page 23.

Windows 2000

For Windows 2000, use the following procedure to install the necessary components.

1. Click Start, point to Settings, and then select Network and Dial-up Connections. The

Network and Dial-up Connections screen appears.

2. Right-click the desired network connection and then select Properties.

Epson Network Guide

How To 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 91 92

Keine Kommentare

Epson AcuLaser C9300 Bedienungsanleitung Seite 21