Epson TM-C100 Bedienungsanleitung PDF herunterladen (Seite 6)

English

10. Attach the AC adapter and then turn on the printer power.

When the power is turned on, the printer recognizes the ASF, which enables printing on slip paper.

Inserting Slip Paper

Note:

Be sure that the slips are flat, without curls, folds, or wrinkles.

Do not print on a medicine or other paper bag that is glued together in the middle of the back side.

When the ASF is attached, if you insert paper by hand using the release lever to open the paper entrance,

any paper already in the printer is ejected. If you want to insert paper by hand with the ASF attached,

wait until the printer is in the paper waiting status (the PAPER LED flashes) and then insert the paper

by hand.

When the ASF is used to insert paper, the paper is fed backward; therefore, if there are any obstacles, the

paper may not be inserted correctly. Be sure to have enough room behind the printer.

1. Be sure that the printer power is turned on. If the power is turned off, turn it on.

2. Handle paper carefully and align the edges. Be sure that the paper is not curved. See illustration O.

3. Insert the paper vertically with the printable surface face up, aligning the paper with the left edge of

the ASF.

4. Squeeze the edge guide and move the edge guide to the right or left to align it with the edge of the set

paper. See illustration B.

Note: If you insert paper less than 80 mm {3.1"} long by mistake, you might not be able to remove the

paper from the top of the ASF. In this case, remove the ASF from the printer and then remove the

paper.

Attaching the Paper Tray

Note:

The paper tray is used to support smooth paper ejection and to keep printed paper in place temporarily.

When printing, be sure the paper tray is attached.

When printing on roll paper continuously, depending on the roll paper length, printed paper that is

allowed to accumlate on the paper tray might impede paper ejection, printed paper might fall from the

tray, or the order of the printed paper might be changed. Therefore, it is recommended to remove each

printed paper before the next is printed.

Insert the hooks of the paper tray into the slots on the lower part of the printer. Pull the concave part of

the paper tray to extend it. See illustrations L and M.

Troubleshooting

❏ See "About Errors" under "Control Panel (LEDs and Switches)" mentioned previously.

❏ If the printer cover is open, close the cover.

❏ If a paper jam occurs, see "Removing Jammed Paper" below.

Removing Jammed Paper

1. Turn off the power.

2. Press the release lever.

3. Remove the jammed paper slowly.

4. Open the printer cover by using the tab to check if jammed paper remains.

5. If there is any jammed paper in the printer, use a tool such as tweezers to remove it. Be careful not to

touch the flat cable or the ink tube when removing the paper.

Note: If it is difficult to remove the jammed paper, contact a qualified service person. If you try to

remove it by force, you may damage the printer.

EPSON Ecology Label

This product is in compliance with the EPSON ecology label requirements.

Please see the following link for detailed information on label criteria.

(http://www.epson.co.jp/e/)

Download

The driver and the TM-C100 Technical Reference Guide can be downloaded from the appropriate web

site below:

For customers from North America, go to the following web site: http://pos.epson.com/

For customers from other countries, go to the following web site: http://www.epson-pos.com/

Select the product name from the “Select any product” pull down menu.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Epson TM-C100 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Epson TM-C100