Epson T3000 Einstellungsanleitung PDF herunterladen (Seite 21)

Performing a Test Print | 19

Performing a Test Print

You can print a nozzle check from the control panel and examine it to determine whether any nozzles are

clogged or deflected. Then you can run a cleaning cycle if necessary.

1. Make sure the paper source and media type settings are correct for the type of paper loaded.

2. Confirm that the printer is ready to print, then press the button on the control panel. The

Maintenance menu will be displayed.

3. Confirm that Nozzle Check is highlighted and press the OK button. A confirmation message will be

displayed.

4. Press OK to print a nozzle check pattern.

5. Examine the printed pattern.

• If the pattern looks good, as shown below, the print head is clean.

• If any dots or segments are missing or deflected, as shown below, follow the instructions on the

control panel to run a cleaning cycle. Then print another nozzle check pattern to make sure the

nozzles are clean.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Epson T3000 Einstellungsanleitung Seite 21