Dr.EpSON Refill Tool Instructions Copyright © 1999-2009 MagicInkjetFlush.com Página 7
Picture 7
Leave left circle intact!
---------------------------------------------------------------------
Picture 8
Insert metal tip of Dr.EpSUN Refill Tool through transparent seal. (centre hole)
---------------------------------------------------------------------
Using Dr.EpSUN Refill Tool gently pierce the see thru plastic with metal tip.
---------------------------------------------------------------------
Pictures 9/10
Insert metal tip until the black neoprene rubber makes a good seal around hole you
just made.
---------------------------------------------------------------------
Picture 11
Now we are going to fill by creating a vacuum ...
---------------------------------------------------------------------
(So pull up the plunger and you should see air bubbles escaping from the cartridge
into the Dr.EpSUN Refill Tool . Allow the plunger to retract and the liquid (ink –
Magic… whichever you are using) will automatically be sucked back into the
cartridge to replace the air!)
---------------------------------------------------------------------
a) But remember before you start… the Dr.EpSUN Refill Tool = syringe should
only be half full! to allow space for the removed air!
---------------------------------------------------------------------
b) Don´t try to inject the liquid into the cartridge, instead do the opposite and suck
the trapped air inside the cartridge up into the REFILL TOOL using the plunger!
Make sure the black rubber is in good contact to make an airtight seal.
---------------------------------------------------------------------
c) Slowly pulling the plunger up... you will see air bubbles escaping from inside the
cartridge up into the syringe.
---------------------------------------------------------------------
Pictures 12/13
d) Don´t push plunger… instead allow the plunger to retract by itself
as it does so the cartridge will automatically start to fill by itself!
---------------------------------------------------------------------
e) Continue the same procedure... removing air by pulling up the plunger &
releasing the plunger until all the liquid in the syringe has been replaced by air.
---------------------------------------------------------------------
Picture 14
If more liquid is required to fill your cartridge? no problem... You may remove
metal tip, reload HALF FULL again and continue the same action… removing air then
allowing the plunger to retract, whilst keeping a good seal around the black rubber.
---------------------------------------------------------------------
Picture 15
Once colored liquid is withdrawn instead of air the cartridge is full!
---------------------------------------------------------------------
(Escaping colored liquid will depend on which color you are filling)
---------------------------------------------------------------------
Pictures 16/17
Allow plunger to retract then stop.
---------------------------------------------------------------------
Pictures 18/19
Gently remove Dr.EpSUN Refill Tool cartridge , it should not leak.
---------------------------------------------------------------------
Picture 20
Sellotape is now required to seal the hole you made... but first wipe off any spillage
with a tissue and make sure it is clean and dry.
(2 Seiten)
(4 Seiten)
(475 Seiten)
(44 Seiten)
(4 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern